Vestel washing machine does not spin out laundry

You’re not the only one who has finished a wash cycle with a pile of soggy laundry. The frustration of their washer not spinning out clothes properly is something that many owners of Vestel washing machines have gone through. Not only is it annoying when your laundry is still heavy and wet, but it may indicate that there is a problem with your machine.

Your Vestel washing machine may not be spinning out your clothes for a few common reasons. Occasionally, it might just be a straightforward problem, like an uneven load or an improperly closed door. In other cases, there may be a more complex issue, such as a pump or motor issue. Gaining an understanding of these possible problems will enable you to troubleshoot and potentially restore your washer’s functionality.

This post will examine potential causes of spinning issues with your Vestel washing machine and provide advice on how to resolve them. Whether you’re a do-it-yourself enthusiast or just need some advice, we’ll go over the essentials to help you restart your laundry routine. Let’s examine the most frequent reasons why your Vestel washer doesn’t spin correctly, as well as some fixes for it.

There are a few common reasons why your Vestel washing machine might not be spinning out laundry, including an overloaded drum, a clogged pump filter, or an issue with the spin cycle settings. Gaining insight into these possible issues will enable you to troubleshoot more efficiently and restore your machine’s optimal performance. We’ll examine the most common reasons and workable fixes in this post to make sure your laundry is dried and spun correctly.

How to explain the "behavior" of equipment?

It is highly advised against ignoring Vestel’s resistance to spinning out. Sure, you can manually "squeeze out" the laundry once the cycle is finished, but there’s no point in doing so. You must first invest your time and energy. Second, the washing machine’s condition will deteriorate until it breaks down entirely if repairs are not made in a timely manner.

Before diving into the diagnostics, it is important to list all potential problems. The following issues typically cause Vestel to spin more slowly:

• spinning is disabled (speed is reduced to minimum or "no-spin" program is selected);
• the system has detected an imbalance (for safety reasons, the board has cancelled the spinning);
• the drain does not function (water does not drain, the spinning does not start);
• the Hall sensor is broken;
• the Vestel engine is out of order;
• there are problems with the bearing unit;
• the electronic unit is "frozen";
• the drum is jammed by a foreign object.

It is forbidden to use the washing machine if there are spinning issues because it could be dangerous!

Nearly every malfunction on the list is fixable on your own at home. There is only one situation in which you need to get in touch with the service: if the control board is having issues. In other cases, handling a non-functioning spin cycle on your own is not difficult; the key is to take cautious and consistent action. Here are some suggestions and step-by-step instructions.

Have you selected the correct mode?

Dashboard diagnostics are where it all begins. It is important to recall the program that was introduced. Most of the time, there is no breakdown; rather, the no-spin mode was accidentally activated by the user. Vestel, for instance, should not spin the drum when washing delicate or by hand, or when the selector is set to "Down," "Wool," "Underwear," or "Silk." It is best to refer to the manufacturer’s instructions and make sure you understand the entire list of non-spinning buttons.

You can prevent unintentional modifications to the cycle parameters by locking the dashboard using the "Child Protection" feature.

It is advised to take the second step to see if the spin was inadvertently canceled. Users of many contemporary Vestels have the option to reduce the drum rotation speed to "0." Consequently, the matching step is abandoned, leaving the laundry still damp. You can easily verify your guess by watching the washing machine, turning on the quick program, and setting the engine speed to maximum. Proceed with further diagnostics if the situation recurs.

The drum contents are not balanced

If an imbalance is found when spinning the drum, the washing machine will not turn on. Unbalance results from overload, underload, or "clumping" of laundry. When the cylinder "goes off" the intended trajectory, the board reacts by stopping the cycle.

This issue usually arises with Vestel, which was released five to ten years ago. Thanks to specialized sensors, modern models can regulate the balance and indicate the associated error code when there is a deviation from the norm. Here are some ways that imbalance shows up:

• after rinsing, the unit tries to spin the drum;
• each attempt to spin is accompanied by a hum or knock;
• the machine begins to “jump”;
• spinning is canceled;
• the washing machine completes the cycle 7-15 minutes earlier;
• things in the drum remain wet.

Depending on the circumstances, different instructions apply for adjusting the imbalance. It is sufficient to open the hatch, remove a few items from the machine, and restart the cycle if there is an excessive amount of laundry inside. In the event that there is insufficient laundry, we load the drum with more clothes. There are situations when a crumpled duvet cover is the issue; in these cases, the lump needs to be "broken up" and the fabrics need to be distributed evenly along the cylinder’s walls.

Not only does imbalance cause the spin to stop, but it also puts the machine in danger. Shock absorbers, shafts, and bearings are harmed by the "jumps" and knocks of the drum against the case walls. It is preferable to prevent clumping, avoid situations like this, and keep in mind the minimum and maximum load.

Motor dysfunction

Even if there are engine issues, there won’t be any spinning. The explanation is straightforward: the drum stays motionless because the motor is unable to accelerate to the desired speed. In this situation, disassembling and inspecting the engine is required as diagnostics and repairs are not feasible. The guidelines are as follows:

• disconnect Vestel from communications;
• remove the “back” from the body;
• pull the drive belt off the pulley;
• find the engine;
• release the motor from the wiring and fasteners;
• swing it and remove it from the grooves.

We examine the engine that has been removed. The breakdown is typically detectable right away; dark patches, melting insulation, and the smell of burning are all evident. It is occasionally necessary to open and swap out the electric brushes. Sharpening the lamellae and ringing the winding are recommended in extreme situations.

It can be annoying to deal with a Vestel washing machine that won’t spin out your laundry, but there are a few things you can do to fix the problem. First, make sure the load is distributed evenly within the drum. The machine may not spin correctly if the clothes are overloaded or distributed unevenly. See if redistributing the load and performing a spin cycle resolves the issue.

The drain pump or hose may be the source of yet another frequent problem. In order to ensure proper drainage and spinning, make sure the drain hose is not kinked or clogged. Inspect the pump filter as well for any debris that might be obstructing the flow of water. Spinning problems are frequently fixed by cleaning these parts.

It may be necessary to examine the machine’s internal components if these checks are unable to resolve the issue. In addition, malfunctioning motor parts or worn-out belts may stop the drum from rotating. It is best to seek the advice of a qualified technician in such circumstances in order to identify and fix the problem. Maintaining your Vestel washing machine in good working order for many years to come only requires routine maintenance and quick fixes for small issues.

Video on the topic

The washing machine does not spin, or how the machine weighs things

The Indesit washing machine does not spin the laundry, does not pick up speed

The washing machine does not spin the laundry. What to do?

The first and third indicator on the VESTEL washing machine is blinking. Error blinking wash and spin/drain