The spin function of the Gorenje washing machine does not work

It can be annoying and inconvenient when the spin function on your Gorenje washing machine breaks down. Since the spin cycle is essential for getting rid of extra water from clothing, a malfunction could leave your laundry drenched and require more time to dry.

The spin function may malfunction for a number of reasons, from straightforward ones like an uneven load to more complicated ones like a broken motor or control panel. You can troubleshoot the problem and determine whether you need professional assistance or not by being aware of the potential causes.

This article will examine typical causes of the spin function’s malfunction and offer helpful advice on how to fix it. You’ll find helpful instructions to get your washing machine operating normally again, regardless of the severity of the problem.

Your Gorenje washing machine’s inability to spin may be the result of several problems, including an uneven load, a clogged drain pump, or a broken motor. You can troubleshoot and resolve the issue to restart your machine by determining the root cause.

List of probable malfunctions

If the spin function isn’t working, you should first make sure it was turned on when the machine was turned on. You might unintentionally disable the feature or choose a program that doesn’t offer it. The laundry in the drum will then continue to be damp. This is among the potential causes. The following conditions must be met for the Gorenje machine to stop spinning:

• drive belt. Worn out or stretched rubber can fly off the pulley, and the drum simply will not rotate;
• tachogenerator. If the Hall sensor breaks, the intelligence will not be able to regulate the engine speed, which will disrupt the normal operation of the washing machine;
• electric motor. The reason may be in worn out collector brushes or a broken winding;
• control module. If the triac on the board that controls the operation of the engine or tachogenerator burns out, problems with spinning may occur.

The list of possible malfunctions will grow even longer if the automatic Gorenje machine is not only incapable of spinning but also fails to release water into the sewer.

You will need to diagnose the machine in order to determine why it isn’t spinning. Without contacting a technician, you can examine the machine on your own. You’ll need a multimeter to test the washing machine’s components and a few screwdrivers to disassemble the casing and disconnect the parts.

The owner herself messed something up

If the machine worked as expected, but the things in the drum are wet, make sure that you did not mess up the settings when starting the program. Some modes, for example, "Shoes", "Silk", "Outerwear", simply do not provide a spin function. If you are completely sure that the desired program was selected, check whether the option was forcibly disabled. Some Gorenje washing machines have a spin deactivation button with a special spring mechanism. So, the machine will spin things only when the button is pressed. If during the last wash, or accidentally, the button is pressed, then the spin will be blocked for all subsequent cycles, even after the machine is turned off.

This assumption may seem unimportant at first, but it solves a problem for a lot of users. To resume the spin, simply move the button back to the desired position.

When the laundry gets clumped together or the drum becomes overloaded, the automatic machine occasionally won’t spin. For this reason, it is crucial to load precisely the number of kilograms that the manufacturer permits. Additionally, make sure the clothes are distributed evenly inside the washing machine to avoid any imbalance.

Speed sensor or drive

Sometimes there is a broken element, which causes the spin to not function precisely. In this scenario, one or more of the Gorenje automatic machine’s modules will need to be fixed or replaced. You will need to diagnose the unit in order to determine exactly what is malfunctioning. First things first. As the check goes from simple to more complex, each potential cause should be ruled out one at a time. You should start by paying close attention to the drive belt.

There is a direct link between the spin function and the drive belt. The centrifuge will not spin at the necessary speed and the washing machine will "freeze" if the "rubber" is unable to consistently transfer impulses from the motor to the drum "wheel."

Make sure you disconnect the power cord from the outlet and turn off the water supply tap before handling the equipment.

In order to inspect the drive belt, you must:

• move the machine away from the wall to get free access to the back of the case;
• unscrew the screws and remove the back panel of the washing machine;
• check the belt tension. It should "sit" tightly on the pulleys. If the rubber has loosened or has defects, you will have to replace the element.

Occasionally, the user may not notice the belt on the drum pulley until the back wall of the case has been removed. This indicates that the rubber has flown off and is lying beneath the machine due to extreme stretching. It is also preferable to replace the belt in this case. A new drive belt is easy to tighten; just place it on the larger pulley first, then the smaller one. Applying the rubber with one hand while turning the wheel with the other to create tension is the proper technique.

The non-functioning spin may also be caused by the Hall sensor. This tiny metal ring is attached straight to the engine and has a wire. The tachogenerator enables the washing machine’s "brain" to comprehend the motor speed. The machine might act differently in the event that the Hall sensor fails. The machine may occasionally stop washing completely, or it may just stop spinning. The tachogenerator needs to be checked by:

• remove the back wall of the case;
• drop the drive belt;
• unscrew the bolts securing the engine;
• disconnect the power supply wiring from the motor. It is better to take a photo of the connection diagram in advance so as not to make a mistake during reassembly;
• pull the engine out of the case;
• measure the resistance of the Hall sensor contacts with a special device – a multimeter.

Should the check indicate that the tachogenerator is operating correctly, you will need to investigate the issue more. Once the problem has been located, you should replace the sensor because it cannot be fixed.

For efficient laundry care, make sure the spin function on your Gorenje washing machine is operating correctly. It’s critical to troubleshoot any issues you find right away in order to limit additional harm or inconvenience.

You can usually find and fix the issue on your own by following the steps listed. On the other hand, it might be time to seek advice from a qualified technician if the problem continues.

You can increase the lifespan of your washing machine and make sure that your clothes are always cleaned and dried correctly by taking good care of it and fixing small problems as soon as they arise.

Video on the topic

The washing machine does not spin, does not go to spin, freezes!UE error

Why the spin does not work? Gorenje wa982

WASHING MACHINE DOES NOT SPIN — SPIN DOES NOT WORK – The machine DOES NOT pick up speed during SPIN

The washing machine takes a long time to wash 😱 Does not spin 🤬 Do it yourself 👨‍🔧

The washing machine does not spin 🧺