It can be very annoying when the hatch on your Beko washing machine won’t close. This problem may keep you from initiating the washing cycle, leaving you with a mountain of laundry and a broken appliance.
The hatch may remain open for a number of common reasons. A simple obstruction in the door or an issue with the latch mechanism could be the cause. In certain instances, the problem may be connected to the electronic parts of the device.
Restoring the functionality of your washing machine can save you time if you are aware of the possible causes and know how to fix them. Let’s examine the most frequent causes of hatch non-closing and possible solutions.
| Problem | Possible Causes |
| The door won"t close properly | The latch may be blocked or misaligned |
| The door is stuck open | The hinge might be damaged or worn out |
| The door won"t lock | The lock mechanism could be faulty |
The door mechanics are “acting up”
The Beko machine won’t close at all if the door has mechanical issues. The hatch pushes out from the body or refuses to lock into the slots. When this happens, it will appear as though something is blocking the lock and keeping the mechanism from "clutching." In any event, the drum won’t close and you won’t hear the distinctive click.
The mechanics of the door "act up" most frequently when the door is overloaded. You can hang damp laundry on it or slam it. The door hinges are negatively impacted by children trying to "ride" on the hatch. Various structural components skew or break as a result.
- Door skew. Over time, the door hinges sag, especially if you constantly hang heavy laundry on the glass or slam the door hard. To restore the balance, you need to adjust the position of the hatch, and then tighten the fasteners. If the fasteners are broken, you will have to replace them: remove the old ones and install new ones.
- Displacement of the tongue. The tongue is a “hook” inside the lock that holds the door closed. A special metal rod helps it do this. The latter often falls out, which is why the whole stop is shifted. To return the elements to its original position, it is necessary to disassemble the door, find, open and repair the shut -off mechanism.
The Beko washing machine can break a lock or door handle if it is slammed with great force.
- Damage to the door handle. Prevents the proper clutch of the door with the body and the breakdown of its handle. Repair will not help here – only replacement.
- Problems with the guide. This is a plastic plate, which, when the lock is triggered, is bent and clicks, fixing in the groove. Over time, it wears out and breaks: the hook stops holding on, and the hatch does not close.
There is no way to figure out why the washer won’t shut. It is imperative to examine every component in turn that needs to be fixed. Directions, actions to take, this:
- de -energize the washer;
- open the hatch;
- inspect the lock;
- unscrew the fasteners that secure the door to the body of the machine (use a star screwdriver);
- lift the door and remove it from the fasteners;
- assess the condition of the hinges, tighten if necessary;
- loosen the screws holding the two halves of the door together;
- "split" the door by prying the upper part with a flat screwdriver and pulling it towards you;
- examine the locking mechanism on the handle.
It is not possible to repair the mechanisms of a Beko washing machine; instead, the door handle or lock must be replaced completely due to the extreme difficulty in finding replacement parts. Merely slight adjustments to the tongue, rod, or hinges can be fixed without having to visit the store. The most important thing is to proceed with extreme caution so as not to harm other system components. If not, things will get worse and you’ll need to get a technician.
The lock does not perform its function
There may be issues with the UBL if the wash still won’t start even after the mechanical lock latches. In addition to keeping the user safe from unintentionally opening the drum while the machine is running, the hatch locking device is automatically engaged at the beginning of each cycle. For safety reasons, the Beko board records the absence of a signal and terminates the program if the blocker breaks and stops working.
Issues with the UBL can occur for several reasons:
- clogged device;
- blocker breakdown;
- factory defect;
- loss of communication with the control board.
It is simple to get a clogged blocker back in working order. It is sufficient to disassemble, dismantle, and clean the UBL of any dust and lint buildup. You will need a replacement if the mechanism’s bimetallic plate breaks or there is a short circuit.
In the event that the control board or UBL malfunction, the Beko washing machine’s electronic blocking remains inactive.
If the control board fails, it gets worse. The washing machine stays open in the event of a software malfunction, microcircuit burnout, damage to the tracks and contacts, or if the UBL is not notified of the blocking. Both power surges in the electrical network and haphazard key pressing on the dashboard, or a single technical "glitch," can result in such a scenario. You will need to carefully inspect, reprogram, and repair the module in order to determine the cause and remove any consequences. Dealing with the electronic unit yourself is not advised; only experts should diagnose the "brains."
The hatch of your Beko washing machine may not close correctly for a variety of reasons, including a misaligned door, a broken latch, or an object obstructing the seal. Thankfully, a lot of these issues can be resolved with easy troubleshooting techniques.
First, make sure there are no obstacles in the vicinity of the door. Examine the latch mechanism for indications of wear or damage if the door is clear. If it’s not working properly, the latch may need to be adjusted or replaced.
Sometimes, the hatch may not close securely because the door hinges are misaligned. Often, a fast adjustment with a screwdriver will fix this problem.
By taking care of these problems early on, you can avoid later, more serious issues. The occurrence of these problems can be avoided by giving the washing machine door regular maintenance and handling it with caution.
Your Beko washing machine’s hatch may not close because of problems such as an improperly aligned door, a broken latch, or obstructions that keep the seal from closing securely. By taking swift action to fix this issue, you can stop additional damage and make sure your machine is back up and running smoothly.
