The drum does not spin in the Atlanta washing machine

That can be annoying when the drum of your Atlanta washing machine stops spinning out of the blue. This problem is more frequent than you may imagine and has a number of root causes. Restoring the functionality of your machine starts with comprehending these possible causes.

The drum may not spin for a few main reasons, from easy fixes to more complicated mechanical issues. Identifying the cause is essential, regardless of the severity of the problem—whether it’s a small one like an uneven load or a bigger one like a broken belt.

This post will explain the most frequent causes of your Atlanta washing machine’s drum stopping spinning and provide helpful guidance on how to diagnose and fix the issue. If you take the proper approach, you can usually resolve the problem on your own without consulting an expert.

What provoked the problem?

Let"s say right away that many malfunctions lead to the braking of the drum on Atlant washing machines, from a slipped drive belt to a broken engine and problems with the board. To simplify the search for the "culprit", it is necessary to analyze the behavior of the machine and more accurately identify the breakdown. This article will consider a situation in which the machine accepted the user command, started the cycle, filled with water and only then stopped. In this case, the pump works properly, and the unit itself makes cracking sounds. That is, in our case, the motor does not rotate at all or accelerates, but does not transmit the impulse further.

The cracking that is released reduces the possible causes to the following breakdowns:

• the drive belt is torn or has come off the pulley;
• the electric brushes are worn out;
• the lamellas have peeled off;
• the tachometer is damaged;
• the electric motor is broken;
• a foreign object is stuck between the tank and the drum.

The drive belt, Hall sensor, motor, or an object lodged in the tank can all cause the drum of Atlant washing machines to stop rotating.

Knowing whether the drum is spinning and whether other system components are operating normally are crucial for diagnosing. If not, there will be a multiplicity of potential malfunctions.

Let"s pay attention to the motor

The motor is the first thing to suspect when the washing machine’s drum stops rotating. Everything makes sense: the shaft stays motionless and does not receive an impulse from the motor. There are numerous reasons why the engine might not run, though.

Before attempting a "diagnosis," one must ascertain the cause and timing of the motor’s failure. The brushes are to blame if the engine starts, rotates the shaft, but stops when the engine is subjected to additional load, like when the belt catches. They need to be replaced because they can’t be fixed.

The procedure for changing the electric brushes is as follows:

• unscrew the bolts from the back wall and remove it;
• remove the drive belt from the pulley;
• unhook the wiring from the engine;
• loosen the bolts holding the motor;
• rock the housing, take out the engine;
• find the "cases" – brushes – on the sides of the housing;
• unscrew the fasteners that fix the brushes;
• release the brushes;
• evaluate the condition of the carbon tips – if they are worn out, then replacement is necessary.

Electric brushes are installed only in pairs, so you cannot replace just one of them!

Only in pairs are brushes changed, even if one is entirely undamaged. Similar tips must be bought and installed in the proper location.

You must carry out more diagnostics if neither brush has reached its "limit." The tachometer sensor, which measures the engine’s acceleration, is the next in line. For safety reasons, the engine does not start if the sensor fails. A multimeter with a resistance measurement setting is used to verify that the device is operational.

Moreover, the engine cannot accelerate to its maximum potential due to peeled lamellas. You will need to disassemble the motor body and examine the collector plates in order to verify your guess. You will have to grind the engine if they are out of order.

A damaged motor winding is another common Atlant machine malfunction. As a result, we apply the probes to every pair of lamellas and change the multimeter to measure Ohms. If all of the values fall between 0.1 and 0.4 ohms, then the wiring is correct.

Problems with the belt

A slipping drive belt frequently results in the drum stopping. It’s that easy: the engine accelerates, but since there isn’t a "intermediary" to transfer the speed to the drum shaft, the machine initiates the wash without actually washing. Since there is enough rubber band to manually open the hatch door and spin the tank, it is simple to confirm that the band has broken off. If there are no obstructions to the motion, the drive may be malfunctioning.

In three situations the belt comes off:

• accidentally, due to strong vibration of the machine during spinning;
• when stretched (when the belt stretches by 2 or more cm from the original diameter);
• if it breaks.

Rubber band replacement is required if the drive belt has stretched during operation and the difference between the current and initial diameter is more than 2 cm!

It is sufficient to replace the old belt in the event of a single failure. A replacement rubber band is required if it has broken or has already come off twice in a six-month period. In extreme circumstances, we concentrate on the Atlant washing machine model and purchase a new "ring" based on the serial number applied to the rubber surface.

Let’s talk about how to make sure the belt "sits" perfectly on the pulley. Grasping the rubber band in one hand, we spin the wheel with the other. Since the ring stretches extremely hard, tensioning will take a significant amount of time, patience, and skill. Ideally, it’s worth getting the whole team involved and inviting an assistant.

If the drum on your Atlanta washing machine isn’t spinning, you should take quick action to fix it. A simple fix, such as an uneven load or a power supply issue, can frequently be found for the issue. These are simple to fix and could quickly restore your machine’s functionality.

If the problem continues, though, it can indicate a more significant electrical or mechanical malfunction. Certain parts, such as the control board, motor, or drive belt, may require expert maintenance. Preventing these issues through routine maintenance can help ensure that your machine remains in good working order.

Recall that identifying and resolving issues with your washing machine early on can ultimately save you time and money. Do not hesitate to call a technician if you are not confident that you can handle the repair yourself. Maintaining a smooth laundry routine and preventing additional inconveniences require making sure your washing machine is in good operating order.

Your Atlanta washing machine’s non-spinning drum could be the result of several problems, such as an imbalanced load or a broken drive belt or malfunctioning motor. Gaining an understanding of the cause is essential to restoring your machine’s functionality, and this article will walk you through the potential causes and fixes.

Video on the topic

Atlant washing machine error F9. The drum of the washing machine does not spin well

The drum in the washing machine does not spin

The Atlant washing machine does not spin the drum

WASHING MACHINE DOES NOT SPIN THE DRUM – if this is the REASON, then a simple DIY REPAIR

Repair of the Atlant washing machine error F09 F9. Atlant does not start washing. Atlant engine repair.

The drum in the washing machine is jammed

What to do if the washing machine does not spin the drum. Resolved / The washing machine does not spin the drum?

The washing machine does not spin the drum | Repair of washing machines in Kaluga