The belt in the washing machine is scrolling

The scrolling belt on your washing machine can be annoying and inconvenient. An integral part of what makes the drum spin and move is the belt. If it’s not functioning properly, it can interfere with your laundry schedule and lead to more significant issues if left unattended.

Knowing the causes of a scrolling belt will enable you to promptly resolve the problem and shield your washing machine from additional harm. Wear and tear, incorrect installation, or a loose belt are common causes. Most of these problems are easily fixed with a few straightforward steps.

The common causes of a washing machine belt scrolling will be discussed in this article along with simple fixes. You can quickly restore your washing machine’s smooth operation with the appropriate strategy.

Temporary elimination of scrolling

What dangers come with the drive belt slipping? The efficiency of transmitting impulses from the electric motor to the "centrifuge" is greatly reduced by the rubber band, which scrolls on the shaft or drum "wheel" as it gains speed. Every stage of the cycle is regularly observed in this situation. Consequently, the washing and spinning quality is significantly lower.

It’s best to replace the drive belt element right away after noticing that it’s scrolling.

What should you do if you decide not to fix your "home assistant" right away? And there isn’t any money to place orders or purchase parts? In order to increase friction, some machine owners use deceit: they spray a special aerosol on the rubber band. The cost of Hi-Gear Belt Dressing spray is 490 rubles. It’s true that the product’s effects are only temporary—up to 20 washes—so you’ll need to disassemble the machine and start the process over roughly once a month.

Rosin will assist in temporarily resolving the slippage issue. For only 20-30 rubles, you can purchase a bar of the product at the first hardware store you come across. The working surface "in contact" with the pulley, which is the inside of the drive belt, needs to be rubbed with this piece.

There is a clear disparity in the price of these two items. Even more potent, though, is rosin, which increases friction without discoloring the belt. As long as the rubber band is dry, dust and other debris won’t adhere to its surface.

Applying rosin to the drive belt has a 25-wash maximum retention period. This will give you enough time to locate the closest specialty shop or place an online order for machine parts. Regrettably, belt slippage can occasionally be brought on by more significant issues rather than normal deterioration and rubber stretching. For instance, a shifted shaft shape, a fractured crosspiece, or bearings. This needs to be examined.

Ineffective washes and potential machine damage can result from a washing machine’s belt sliding or scrolling, which can stop the drum from rotating correctly. A worn-out or loose belt is frequently the source of this problem; it may need to be replaced or tightened. Your washing machine’s lifespan can be increased and its smooth operation maintained by knowing the symptoms of a scrolling belt and how to repair it.

How to install the belt correctly?

You do not immediately need to contact the service center if the rubber band is spinning or even flies off the pulley. Naturally, it is preferable to call a master if the machine is still covered by warranty and the repair will be free; however, in other situations, you can handle the breakdown on your own. The drive belt can be tightened with a little patience and skill; no special knowledge is required.

You can attempt to just tighten the belt back on when it comes off for the first time. There’s a good chance it will continue to function admirably for another year. Should the rubber band continue to come loose, it will need to be changed.

In order to access the drive belt and evaluate its state, you must:

• disconnect the washing machine from the network;
• close the shut-off valve on the pipe that controls the water supply;
• move the machine away from the wall. You will need free access to its back;
• unhook the inlet hose and drain sleeve from the washing machine body;
• unscrew the screws securing the back wall. Some machines will require removing the housing cover first;
• find the drive belt. It will be stretched over the drum pulley. If the rubber band has come off, look for it on the floor, under the machine.

The belt is found in one location on all automatic machines with collector electric motors; it is stretched between the electric motor and the drum pulley. The rubber band has fallen and is now lying beneath the device if it is not visible here.

It is vital to compare the drive belt’s original dimensions with the current ones in order to evaluate its state.

You must locate the rubber band’s factory stamp in order to accomplish this. The initial dimensions of the belt, or its "normal" diameter in millimeters, are indicated by the first four digits of the marking. The last step is to take a manual circumference measurement and compare the two results.

A small departure from the factory specifications is regarded as typical. The belt needs to be replaced if it has stretched more than 20 mm. Such an elastic band will constantly fly off the machine, making it unfit for installation. Parts for an automatic machine are available online or in local stores. It’s crucial to pay attention to the washing machine’s model and serial number when purchasing replacement parts. It is even more advantageous to show the seller the broken-down elastic band so that he can choose an analog with accuracy.

Reinstalling the belt is necessary to fix the machine. The engine pulley is first covered with the elastic band, which is then gradually drawn onto the drum "wheel." Turn the larger pulley from right to left with your free hand.

It is crucial to start at the bottom and work your way up to the drum pulley without disturbing the belt tension sequence. It is best to call a family member if you lack the strength to apply the rubber on your own. It’s best to exercise patience when using certain washing machines because of their tight belts. Verify that the rubber band "sits" in its proper location once the task is completed. Turn the pulley to accomplish this; the wheel should "go" tightly. If everything checks out, you can put the unit’s body together:

• fasten the back panel by screwing in all the previously removed bolts;
• put the "cover" in place, fix it with screws.

After that, you must return the machine to its original location and attach the drain and water intake hoses to the apparatus. The last step is to test the machine by initiating a blank wash. Successful replacement of the belt can be declared if the drum rotates "as it should."

Although a slipping belt in a washing machine can be annoying, it’s a common problem that many do-it-yourselfers can resolve. Wet clothes and incomplete wash cycles are frequently the result of a slipping belt, which prevents the drum from spinning properly or at all. Repair costs can be reduced by being aware of the warning signs of a worn-out belt and knowing when to replace it.

Performing routine maintenance, such as examining the tension and condition of the belt, is essential to maintaining the optimal functioning of your washing machine. It is advisable to replace the belt right away if you observe any wear indicators, such as fraying or cracking, to prevent additional harm to the machine.

You can increase the lifespan of your washing machine and make sure it keeps working well by taking quick care of this problem and making sure the belt is in good condition. Your washing machine can continue to function properly for many years to come with a little upkeep.

Video on the topic

automatic machine. belt slips (slips). belt tension if there is nowhere to tighten)))

When the drum rotates, it creaks, even if you just spin it by hand.

The washing machine belt flies off. Causes and repair

Samsung washing machine: the belt slips.

Replacing the belt in a top-loading washing machine

After installing the belt, it immediately starts to creep with frost 2 turns and flies off Indesit WISL 103