Indesit washing machine jumps a lot during spinning

You’re not alone if your Indesit washing machine shakes or jumps a lot while it’s in the spin cycle. This is a prevalent problem that can be both annoying and worrisome. No one wants their machine to be noisily bouncing around the laundry room or possibly breaking something.

Your washing machine may be acting this way for a number of reasons. It might be caused by a more significant mechanical issue, or it might be as straightforward as an unbalanced load. Finding a solution requires first identifying the cause.

This post will guide you through the most frequent reasons why spinning causes excessive vibration and provide helpful advice on how to resolve the problem. Your washing machine ought to be operating smoothly and silently by the end.

If your Indesit washing machine oscillates while spinning, it’s probably because the load is unbalanced, the surface is uneven, or the shock absorbers are worn out. By taking care of these problems, you can maintain damage avoidance, machine stabilization, and quieter, more efficient operation.

Why equipment jumps?

Any machine will shake during washing, but not significantly because shock absorption and counterweights help the machinery reduce the majority of the centrifugal force. As a result, the washing machine operates quietly and without significant vibration, not interfering with daily tasks. Only when spinning does noise and vibration increase, but this is typical. When the device stops vibrating while spinning and starts to shake or even jump, there’s obviously a problem.

Nevertheless, there are situations when the user or the service center technician installing the equipment is to blame for the excessive shaking, so it’s not always the "home assistant" that is to blame. Thankfully, you don’t even need to call a repair service because you can solve the majority of the causes of this behavior on your own in a matter of minutes. We will enumerate every circumstance that could give rise to this issue.

• Incorrect installation of the washing machine.
• Imbalance in the device.
• Overload or underload of laundry in the drum.
• Transport bolts have not been removed.
• Foreign objects, such as keys, coins, hairpins, needles, buttons, bra bones, etc., have gotten into the space between the drum and the tank..
• Defective shock absorption, for example, weakened springs or dampers.
• Worn out bearings.
• Deteriorated counterweights, for example, loosened retaining bolt or cracked concrete blocks.
• Failed electric motor.

Most importantly, in order to prevent further damage to the household appliance, immediately eliminate any cause of strong vibrations. Any issue can be resolved as long as you adhere to the comprehensive guidelines and fundamental safety precautions.

How to best troubleshoot?

It is not necessary to contact a service center specialist immediately, as you can handle the primary causes of excessive shaking at home on your own. As a result, you must first perform a thorough diagnosis of the washing machine, working your way up to more complicated issues after addressing the most fundamental ones.

One of the most frequent ones is imbalance, which occurs when the drum loses equilibrium and starts to veer off course and strike walls. This is the cause of the washing machine’s noise, vibration, and jumping. Typically, imbalance arises in the following situations:

• things in the drum have gathered into one big lump, for example, penetrated the duvet cover;
• the owner of the equipment added too few things for washing, or vice versa – exceeded the maximum permissible weight;
• the weight of the loaded laundry is too little or too much to start a specific washing mode.

Service center technicians also frequently deal with situations where users fail to remove the device’s transport bolts after purchasing it. This case pertains to brand-new automatic washing machines that are introduced right after purchase. The user manual makes it very clear that using transport bolts to start the machine is not allowed. This is because doing so can cause damage to the washing machine’s internal components, and doing so will void the warranty provided by the manufacturer.

In addition, the "home assistant" jumps and shakes a lot due to improper installation. You can confirm this by attempting to shake the machine’s body yourself. The washing machine should be leveled using a standard building level if it moves when lightly pressed. This indicates that safety precautions were not followed during installation.

An object that has become lodged inside the device is thought to be another relatively simple cause of the malfunction. You must manually rotate the drum and open the hatch while shining a flashlight through the machine’s tank in order to disable this option. This will enable you to identify any foreign bodies that could be the cause of an imbalance that arises during surgery.

We are now dealing with more significant issues, which is why the washing machine jumps and shakes. This is the shock absorption first, which is supposed to lessen strong vibration and shaking. The truth is that as the dampers deteriorate and the springs lose their elasticity during use, the drum starts to bang against the device’s walls, making a loud noise and jumping. Almost the same thing occurs in the event that the concrete counterweights are compromised or broken. Therefore, it is obvious that the bearings need to be checked if the machine produces a grinding or even clanking sound instead of a dull knocking while it is operating.

If the equipment’s warranty is still in effect, you shouldn’t open the case yourself as this voids it. Only a service center employee is authorized to perform such significant repairs.

You can manually remove the washing machine’s top panel and examine all the important parts that might be the issue if the warranty has expired and the machine is not shaking. The reason is most likely concealed in the electric motor or a factory defect when there is no imbalance or foreign objects in the tank, the transport bolts are removed, the "assistant" stands precisely in accordance with the building level, the bearings and shock absorption are normal, and even the counterweights are intact.

We fix the problem with our own hands

As soon as you notice a problem, you should start fixing it right away to ensure that using the washing machine is safe. Because the reason for the shaking determines what needs to be done, the list of steps and tools is never the same. You must do the following if you hope to remove the imbalance:

• complete the current working cycle;
• disconnect the machine from the power supply;
• activate the drain of waste liquid;

If the garbage filter’s plug needs to be removed in order to drain the water, this can be done in an emergency.

• open the hatch and fix the problem in the drum yourself.

The most common cause of an imbalance is either doing too much laundry or, conversely, not enough for the chosen working cycle. In this instance, you must either add or remove clothing. If the laundry has collected into a compact mass, you will need to separate it and arrange the garments so that they are evenly distributed within the drum. You can then resume washing by re-plugging the washing machine into the electrical outlet.

Should instability be the cause of the issue, you should equip yourself with a building level and set it atop the washing machine. This will let you precisely tighten the device’s feet so that it lines up with the level. Purchasing and installing customized anti-vibration pads will yield even greater results.

When foreign objects get inside the washing machine and cause damage, it is much harder to get the machine operating normally again. Using a homemade wire hook inserted through the opening between the tank and the drum, you can attempt to remove them. Should this prove ineffective, you will need to unscrew the machine’s back panel, remove the water heating element, and use your hands to extract the foreign object via the resulting opening.

It is not feasible to just repair the device’s operation when the shock absorption is damaged because new parts will need to be purchased. Even if one of the dampers and springs appears to be in good condition, you will probably need to purchase new ones because they should only be replaced in pairs. This is a challenging task that should be either assigned to an expert or completed carefully on your own by following a different set of instructions.

It will also not be simple to deal with if the counterweights are broken. The washing machine’s top panel must be removed in order to examine the blocks and retaining screws. If the concrete blocks themselves have tiny chips or cracks, they can be glued together with glue after the screws are tightened further. It is preferable to just purchase new counterweights if the cracks are extensive or numerous.

Additionally, bearing failure may be the cause of the jumping issue. If this occurs, your only option will be to replace them, which will require almost total disassembly of the home appliance. Given how difficult and labor-intensive the disassembly is—especially without clear instructions—it is best to leave this task to the service center technicians.

When the electric motor is at fault, the situation is the most unpleasant. Without specialized knowledge, diagnosing this unit on your own is extremely challenging, and fixing it is even more challenging. Typically, purchasing a new washing machine solves the issue more easily and affordably.

It’s not just noisy when your Indesit washing machine jumps around during the spin cycle—it’sanindication that something needs to be fixed. Whether the issue stems from an uneven floor, an unbalanced load, or a problem with the machine’s feet, resolving the root cause is critical to long-term appliance longevity.

It can be very helpful to check and adjust the machine’s feet on a regular basis, ensure that it is on a level surface, and distribute laundry evenly. By taking these easy precautions, you can keep your washing machine from undergoing needless wear and tear.

Recall that it’s a good idea to periodically check your washing machine in order to identify any possible problems early on. You can prevent more serious issues later on and maintain a hassle-free laundry routine by doing this.

Video on the topic

Washing machine in spin mode)))) funny))) We wore it out the first time)))

Indesit jumps and makes noise

Washing machine shakes during spin mode, the machine jumps and moves !

Washing machine JUMPS AND MOVES during SPIN MODE. FIX it yourself in 1 minute!

Washing machine jumps, jumps, vibrates 🐎🕴️

Washing machine JUMPS and MOVES during spin mode? How to fix