A holofiber jacket can be intimidating to wash at home. You don’t want to ruin your toasty, comfortable outerwear, after all. However, you can easily clean it with your automatic washing machine if you take the proper approach.
You can follow these instructions to make sure your holofiber jacket is restored to its original, spotless state. Everything from selecting the ideal machine settings to drying techniques to maintain the best possible appearance for your jacket will be covered.
Let’s get started on cleaning your holofiber jacket in a hassle-free, safe manner.
If you follow a few simple instructions, washing a holofiber jacket in an automatic washing machine is simple: use cold water, a gentle cycle, and a mild detergent. To avoid damage, make sure the jacket is zipped up and put in a laundry bag. To preserve the insulation and shape of the jacket, do not use fabric softeners; instead, let it air dry.
- Basic rules
- Polyester and raincoat jackets
- "Membrane" and bologna
- Dry and iron
- Video on the topic
- How to be?Sinetipon rolled up in a jacket🙈 #down jacket #clothing #rivers
- How to wash a synthetic winter jacket in a washing machine automaton?
- How to wash a polyester jacket in a washing machine
- How to wash a jacket in LG washing machine? On what mode?
Basic rules
You must take good care of your favorite down jacket to prevent it from losing its shape and ability to retain heat. However, how should a holofiber jacket be washed? Actually, this artificial filler’s modesty is one of its benefits. As a result, items made using it can be put in the washing machine.
Holofiber-based outerwear can be cleaned automatically in a washing machine.
Selecting the appropriate washing program is crucial, and there are some subtleties involved. Hollofiber is not a good absorber of moisture, so pick a mode that allows for soaking. According to this filler, it is preferable to wash a jacket in the event of severe contamination as follows:
- pour warm water into a basin, dissolve a detergent in it (powder or a special gel for cleaning delicate fabrics);
- soak the product in a soap solution for about half an hour;
- Using a brush with a soft pile, “go through” the sleeves, collar zone, pockets and other most polluted areas. If necessary, these areas can be additionally treated with laundry soap;
- lightly wring out the item and load it into the drum of the washing machine;
- set the delicate mode, select the "Additional rinse" option, select the spin speed of 800-1000 revolutions, start the cycle;
- wait until the end of the wash;
- take the jacket out of the machine, shake it, this will help straighten the filler.
It is preferable to wash the down jacket and washing balls together to stop the insulation from "knocking" into lumps. In the event that special PVC balls are unavailable, the drum can be filled with multiple regular tennis balls.
Water that is 90 °C or hotter makes Hollofiber comfortable.
Even though the filler doesn’t mind hot water, you shouldn’t start a mode with such a degree right away. To begin with, you must read the label carefully to determine what material the jacket’s "top" is made of. Polyester, marsh, membrane, and raincoat fabrics are used in the production of outerwear; each has limitations and maintenance guidelines. As a result, carefully read the product tag before loading into the drum as it includes all drying and cleaning instructions.
Polyester and raincoat jackets
Let’s attempt to determine the best washing conditions for outerwear made of various fabrics sewn onto holofiber. Hence, polyester jackets are utterly unassuming. They dry quickly, don’t easily lose their shape, color, or shine, and are very resistant to dirt. When washing these products, the water should only be heated to a temperature of 40 °C.
Gel compositions for delicate fabrics should be used when washing polyester items. Any use of bleaches is strictly prohibited as they leave stains and streaks on the material.
Raincoat jackets are very breathable and keep moisture out of the fabric. Products hold heat well and maintain their color and shape even after numerous washes. When cleaning such outerwear, the water temperature shouldn’t be higher than 45 °C.
Don’t use the intense spin cycle when cleaning raincoat fabric. This could result in the material developing creases that are very challenging to straighten. Moreover, using bleaches and other harsh household chemicals is strictly prohibited.
"Membrane" and bologna
Membrane-based outerwear breathes well and is resistant to moisture. The material’s exterior is impregnated with a water-repellent silicone or Teflon treatment. Preserving the integrity of this water-repellent layer is the primary goal when washing these jackets. As a result, the item needs to be washed on a delicate cycle, with the water heated to a maximum of 40°C. Running the drying and spinning program is prohibited.
Regarding detergents, it is advised to use liquid powders for fabrics with membranes. They handle dirt with ease and don’t harm the product. The material’s pores may become clogged by abrasive mixtures.
Holofiber-based Bologna jackets cannot be cleaned in an automated washer.
Furthermore, the bologna is the important factor, not the filler. This fabric should only be gently hand washed because it is extremely sensitive to any kind of impact. It is also forbidden to twist the material since this will definitely cause creases to appear. It is advised to hang the product over a container to allow the water to drain and to gently squeeze the product by hand. Straightened bologna down jackets hanging on a hanger.
Dry and iron
Drying a cleaned jacket on polyester "hangers" or the conventional method using a clothesline is preferable. It is absolutely forbidden to place outerwear on a heater or battery. This could ruin your favorite piece of clothing forever.
Ventilation is required in the space where the outerwear is dried. If not, the jacket might start to smell bad. You’ll need to give the product another wash to get rid of the musty "odor." Drying items with a holofiber membrane should be done by spreading them out horizontally on a dedicated clothes dryer. Taking such action will stop the jacket from deforming.
If the down jacket appears excessively crumpled after washing, you can gently use an iron to steam it. The fabric that is used to sew the product will determine the iron’s sole temperature.
| Step | Description |
| 1. Prepare the jacket | Empty pockets, close zippers, and turn the jacket inside out to protect the fabric. |
| 2. Choose the right detergent | Use a mild, liquid detergent without bleach to preserve the jacket"s fibers. |
| 3. Select the washing cycle | Set the machine to a gentle or delicate cycle with cold water to avoid damage. |
| 4. Use a laundry bag | Place the jacket in a laundry bag to prevent it from getting tangled or damaged. |
| 5. Avoid spinning too fast | Set the spin speed to low to prevent the jacket from losing its shape. |
| 6. Dry the jacket properly | Air dry the jacket on a hanger or use a low-heat setting in the dryer with dryer balls to fluff the fibers. |
Although it’s a simple process, washing a holofiber jacket in an automatic washing machine calls for close attention to detail. You can keep your jacket clean and preserve its insulation and shape by taking the right precautions.
It is always best to use cold water on a gentle cycle to avoid damaging the holofiber filling. Using the proper detergent—ideally one made for delicate materials—will help preserve the jacket’s quality.
Don’t wring the jacket out after washing. Instead, let it air dry flat after gently squeezing out any extra water. This process increases the jacket’s longevity and maintains its structural integrity.
You can safely wash your holofiber jacket in the washing machine and make sure it stays warm and fresh for many seasons to come by following these precautions.
