Even though turning off your Indesit washing machine might seem simple, there are a few things you need to remember to do it properly. Knowing what to do when you need to turn off the power for maintenance or to end a laundry cycle can save you time and avoid problems.
Firstly, before you turn off your washing machine, always make sure the cycle is complete. This lessens the chance of any machine damage or problems with water drainage. Most Indesit devices have a "Pause" or "Cancel" button that you can press to halt operations in the event of an emergency or to end the cycle early.
After stopping or ending the cycle, it’s time to switch off the machine. The power button is usually located on the washer’s front panel. All you have to do to turn the machine off is push this button. You might have to hold the button down for a few seconds on some models.
If you’re going to be away from the machine for a while or need to do any maintenance, it’s also a good idea to unplug it from the wall socket. By taking this action, you can make sure the appliance is totally off the power source and prevent any possible electrical hazards.
You can safely turn off and maintain the functionality of your Indesit washing machine by following these instructions. Maintaining the lifespan and efficiency of your washer can also be achieved by routinely turning it off and unplugging it.
| Step | Instructions |
| 1 | Press the power button to stop the cycle. |
| 2 | Wait for the door lock to release (usually a few minutes). |
| 3 | Unplug the machine from the power outlet. |
| 4 | Turn off the water supply to the machine. |
The main ways to safely stop the washing machine
There are several reasons to immediately turn off the Indesit washing machine, such as a large puddle forming underneath the machine or a wallet left in your jeans. You must always de-energize the "home assistant" in a safe and secure manner. Three options are available to users from the manufacturer of the Indesit washing machine.
You can put off washing for a little while. Until there is water in the tank, this option is available for the first few minutes after the cycle is started. If you need to remove the same wallet, keys, or other item from the drum, this method works well. The following is the order in which you should act:
- press the "Start / Pause" button;
- turn the program selector to the "Stop" position.
Following this, the water intake will cease and the control panel’s indicator will flash. The washing machine door will unlock in one more minute. After that, you can open the hatch and take the object out of the drum. Current Indesit devices continue the program from the previous location, remembering the point at which the user paused the cycle.
Shutting down the machine is the second choice. The trick of stopping the cycle won’t work if the tank is already full. The user must use the emergency drain or the appropriate mode to remove water from the drum before opening the washing machine door.
In this instance, you must use the programmer to select the "Drain" mode after pressing the "Start / Pause" button. Hold down the washing machine’s network key after the cycle has stopped if you intend to remove water using the garbage filter. The machine will shut off as a result. You can remove the cord from the socket only after this.
Finally, you can simulate a power outage to quickly shut down the machine. It is only permitted in dire circumstances to remove the washing machine’s power cord from the outlet in order to de-energize the device. Such an incursion into the mind is problematic and may cause the control unit to malfunction.
Because the Indesit washing machines’ software is susceptible to power surges in the electrical network, a sudden drop could harm the control board.
In the event that the machine needs to be turned off while you are washing, you should proceed in order. Press the network key after pressing the "Start / Pause" button. As a last resort, take the power cord out of the outlet.
To make sure you turn off your Indesit washing machine correctly, it’s important to know the easy steps to follow. This tutorial will assist you in turning off your machine securely and swiftly, whether you’re completing a load or getting ready for maintenance. These easy steps will help you keep your washing machine in good operating order and prevent future problems.
The door remains locked
The washing machine does not always shut down "like clockwork." Occasionally, the user is unable to open the drum door after the device has completely stopped. The washing machine stays locked because the hatch locking mechanism is broken.
You don’t need an expert’s assistance to remove the obstruction. The following will be the sequence of events:
- prepare a rope, slightly longer than the diameter of the hatch;
- tuck the cord into the gap between the door and the body of the washing machine, where the UBL is located;
- pull the rope so that it presses on the lock, and move it up and down.
The washing machine door can be opened once the lock clicks. There is more than one option if this one doesn’t work for you. Before pressing on the lock tongue, prepare a thin spatula and place it in the space between the hatch and the body. In order to avoid scratching the washing machine, proceed with caution.
There is a third way to open the door if you are unable to do so using a rope or spatula. In this instance, you must:
- de-energize the washing machine;
- unscrew the two screws holding the top cover of the body;
- remove the "top" of the machine (to do this, you need to push the panel away from you and lift it);
- take a thin slotted screwdriver and push it through the top of the machine to the hatch locking device;
- find the lock tongue and move it to the side.
There will be a click when the lock’s plate is moved. This will show that the disconnecting of the UBL was successful. Verify that the tank is empty of water before opening the door. Make sure you empty it if there is one.
Although turning off your Indesit washing machine is easy, there are a few steps you should know to save time and trouble. Make sure the machine isn’t still actively washing first. If so, you’ll have to either wait for it to finish its cycle or use the pause button in case you need to stop it right away. Turn the dial or press the power button to turn it off when it’s safe to do so. This should be prominently displayed on the machine and is typically simple to understand.
The washing machine should then be unplugged from the wall. Although it’s not always required, doing this can help ensure that the machine is fully off and prevent any electrical problems. Unplugging the machine can also be a wise precaution if you intend to leave it unattended for a long time.
Lastly, if you’re not going to be using the machine for a while, don’t forget to turn off the water supply. This is a good long-term maintenance procedure for your washing machine and helps stop any leaks or drips. You can make sure your Indesit washing machine is securely turned off and prepared for use again by following these easy steps.
