How to replace the cuff on a Beko washing machine?

A Beko washing machine’s rubber door seal, sometimes referred to as the "cuff," may deteriorate or break over time. Leaks, disagreeable smells, and even harm to your laundry may result from this. Although changing the cuff on your own may seem difficult, it’s actually a simple process if you follow the right instructions.

This repair doesn’t require expertise on your part. You can save money and time by doing it yourself if you have the necessary basic tools and pay close attention. We’ll show you how to replace the cuff on your Beko washing machine in this guide, so you can be sure the machine is back in working order.

If you have a little patience, you can handle the process, regardless of whether you need to replace the seal or deal with a tear in the rubber. Let’s get started and use a new cuff to get your washing machine operating again.

On a Beko washing machine, replacing the door seal, also known as the cuff, is an easy task that anyone with some basic do-it-yourself knowledge can complete. The machine’s front panel must be removed, the old seal must be carefully removed, and the new seal must be fitted firmly. By taking a methodical approach, you can save expensive repairs and get the machine back to working like new.

It is important to choose the right cuff

Initially, you ought to purchase a rubber hatch seal as a replacement. Taking off the old cuff and taking it to the store is a win-win situation. The manager will choose a component that resembles the one that was disassembled. Even simpler: locate the rubber band’s article number (license plate) and provide it to the sales consultant.

Furthermore, the Beko model’s serial number can also be used as a point of reference. This brand’s washing machine marking is applied to a label that is adhered above the hatch. It is best to snap a picture of the entire sticker so that you can provide the retailer with the washing machine’s model, code, and year of manufacture if needed.

A few additional tools are required in addition to the new rubber band. This includes pliers and a screwdriver. During the task, a soft sponge and soap will also be useful. With this, the setup phase will come to an end, and you can begin fixing the machinery.

Remove the defective part

Just taking it out of the drum and replacing the seal won’t cut it. During disassembly, the external and internal clamps holding the hatch door’s cuff in place must be released. The following will be the sequence of events:

• feel the external plastic clamp;
• pry up the "spring" of the ring with a screwdriver, pull it to the side and remove. Here it is important not to stretch the clamp;
• on Beko frontal cameras, the front wall is removable. For ease of work, it is recommended to detach the lower false panel, remove the powder receptacle from the case, unscrew the bolts that secure the "front" of the machine. Next, you need to carefully pull off the wall (the UBL wire will be connected to it) and place it next to the equipment;
• pry up the inner clamp with a screwdriver exactly as you pry up the first one;
• pull the rubber band towards you, gradually pulling it out of the grooves.

Following that, you can carefully examine the cuff to look for surface flaws and cracks. Once the source of the damage has been identified, you should work to stop it from happening again and use the machine with caution moving forward.

Pull on the cuff

It’s a little harder to put on the rubber seal than take it off. It will take some work to get the components into the grooves. Comprehensive guidelines for putting in a new cuff:

• clean the seat with soap and a sponge. No need to try to completely wash off the foam, on the contrary, it will facilitate the installation of the rubber band;
• find the mounting marks on the seal, align them with the markings on the body;

Water-draining holes must be found exclusively at the bottom.

• Place the cuff in the recess and pull it in a circle with your thumbs;
• Insert the clamp into the groove, holding it with one hand, tuck it in around the entire circumference;
• Put the front wall in place, secure it with screws;
• Install the previously removed false panel;
• straighten the cuff, insert the outer clamp into the groove with the “spring” down. Carefully pull the ring along the perimeter. If the lock is screw-type, you can first loosen it and then fix it in the housing.

Next, you will need to examine the installation of the rubber hatch seal. Tightening the cuff against the housing and drum is important. In the end, you should turn on the washing machine’s "idle" mode (such as "Rinse") and watch how it works. The repair has been successful if there are no leaks.

Although it may initially seem difficult, replacing the cuff on a Beko washing machine is doable if you follow the right instructions. Fitting the new cuff will be much simpler if you pay attention to how the old one was positioned.

You need to take your time. To prevent leaks in the future, make sure the new seal fits precisely without any twists or gaps. Before reassembling the machine, make sure everything fits snugly because proper operation depends on it.

You can save time and money while maintaining the smooth operation of your washing machine for many years to come by carefully following these steps.

Video on the topic

How to replace the cuff in the washing machine

Replacing the hatch cuff of the BEKO washing machine. An unsuccessful gift for a husband.

Replacing the hatch cuff of the BEKO washing machine

Replacing the cuff DIY Washing Machine Hatch

Replacing the HATCH CUFF on a WASHING MACHINE Quickly and Easily | REPLACING THE CUFF ON THE WASHING MACHINE

Water on the floor under the washing machine / How to change the cuff of the Luke of the Washing Machine