Although installing a Candy washing machine at home may seem difficult, most people can complete the project with the correct help. There are a few simple steps involved in the process, whether you’re setting up a new washer or replacing an old one, to make sure your machine operates safely and effectively.
Make sure the area where the washing machine will be installed is prepared and that you have all the tools you need before starting. Make sure you have a functioning drainage system, electrical outlet, and water supply close by. A well-thought-out setup will save you time and help you avoid future problems.
After everything is set up, make sure your Candy washing machine is connected correctly and operational by carefully following the installation instructions. By focusing on small details, like leveling the machine and fastening the hoses, you can help avoid common issues like leaks or strong vibrations. Your new washing machine will quickly get up and running with minimal effort.
| Step | Description |
| Unpack the machine | Carefully remove all packaging and check the machine for any damage. |
| Remove transit bolts | Take out the bolts used for transporting the machine, usually located at the back. |
| Position the machine | Place the washing machine on a flat, stable surface close to water and power connections. |
| Connect the water supply | Attach the water inlet hose to the cold water tap and secure it tightly. |
| Attach the drain hose | Connect the drain hose to a drainpipe or sink, ensuring it"s securely in place to prevent leaks. |
| Plug in the machine | Insert the power cord into a grounded electrical outlet. |
| Level the machine | Adjust the feet of the washing machine to make sure it’s level, reducing noise and vibration during use. |
| Test the machine | Run a short cycle without laundry to check for proper installation and ensure there are no leaks. |
- Do not rush to accept the goods
- Dismantling the transport bolts
- Where the machine will stand?
- Pay attention to the socket
- Water supply
- Video on the topic
- Installing a Candy washing machine with your own hands
- How to install and connect a WASHING MACHINE?
- Lower case cover Corrugated Washing Machine Protection how to install !!! Candy CS41061DE/1-S
- Washing machines | Candy – Aquamatic – Preparing for installation of washing machines of the Aquamatic series
- Candy Smart CSS4 1062D1/2 washing machine unpacking and installation
Do not rush to accept the goods
Make sure to examine the Candy automatic machine in-store before purchasing one. The body should be free of any chips, dents, or scratches. If you discover even minor flaws, refuse to buy a sample and insist on receiving a washing machine that is in perfect condition.
Customers frequently order delivery of the equipment and pay for the model in the store. In this instance, after the courier delivers the machine to your house, you will need to give it another look. You run the risk of dropping or hitting the unit when it’s being transported or lifted to the floor, which could seriously harm it. If the delivered machine’s body has dents, scratches, or other flaws, do not sign the document.
Link the machine to the power source if it is undamaged. The dashboard indicator should blink and the display backlight should turn on when you plug it in. The values on the washing machine’s display should change when you turn the program selector.
You can sign the paperwork acknowledging receipt of the equipment and release the courier once you’ve confirmed the delivered Candy washing machine is operating properly. It is preferable to get the employee to give you the store’s phone number so you can get in touch with the seller right away if needed.
Dismantling the transport bolts
The transport bolts that are situated on the case’s rear panel must be removed next. They are employed to repair the washing machine’s tank. They prevent damage during transit and keep the tank firmly affixed in the machine.
It is quite possible for the washing machine to break down outside of warranty if the transport bolts are not removed before starting it.
For this reason, it is crucial to take out the retaining bolts before putting the automatic machine in place. If not, the clamps will prevent the engine from trying to spin the drum after the wash has started. This could lead to the drive mechanism failing or the engine burning out. Examine the washing machine’s instructions; they include a step-by-step guide for extracting the transport screws.
With the right size wrench or pliers, you can take the bolts out of the body. The holes are sealed with unique plastic plugs that are included with the apparatus after the clamps are removed.
A Candy washing machine is easy to install; all you need to do is pick the best spot, make sure it’s level, connect the water supply and drainage, and connect the electrical components. You can effectively set up your machine to ensure that it operates smoothly and lasts longer with a few simple tools and a clear understanding of the steps involved.
Where the machine will stand?
Typically, the location of the washing machine is decided upon beforehand, sometimes even before the equipment is purchased. Customers choose a device based on the specific measurements of the niche, bathroom, or furniture arrangement where the "home assistant" will be placed.
Consider carefully how to close a built-in washing machine before making a purchase. The door must be simple to install and in line with the equipment’s dimensions.
The type of flooring underneath the automated machine is crucial. It should ideally have a sturdy tile or concrete floor. Boards must be reinforced before the unit is placed on them.
It is advised against installing the Candy washing machine on laminate because the floor covering will swell and become unusable even with a tiny leak.
Make sure the machine can be connected to the water supply and sewerage system with enough length for the inlet and drain hoses before installing the equipment. After designating a space and verifying that the washing machine fits without obstruction, you can link the appliance to the home’s utility networks. It is essential to follow the directions to the letter.
Pay attention to the socket
It is required to set aside a different socket in order to connect the automatic machine. It needs to have a grounding wire and be waterproof. Even though contemporary washing machines meet all safety regulations to prevent electric shock, it never hurts to be extra cautious.
Stores sell specialized moisture-proof outlets that come with curtains and a cover for protection. This is the best choice for a laundry machine.
Generally speaking, the washing machine’s power cord measures 1.5 meters in length. It is therefore advised to position the socket precisely this distance away from the "home assistant." Although the equipment can be connected directly to the power supply, the manufacturer still advises using a high-quality extension cord.
It is essential to ground outlets in order to avoid mild electric shocks. If not, touching the machine’s body will cause an uncomfortable tingling sensation. Human safety is not seriously endangered by this kind of exposure. It only results in inconvenience and discomfort.
Water supply
The machine just needs to be connected to the water supply and sewage at that point. This is the hardest part of the work. Examine the user manual carefully to ensure that everything is done correctly. The organization of the outlet points is covered in detail in the instructions.
The machine’s inlet hose is typically attached to the cold water supply. There are very few models that can be connected to hot water. This feature is dubious and may damage the apparatus:
- hot water is more polluted compared to cold water, which means that the filters will clog faster;
- high hardness will worsen the quality of washing. The machine will "eat" more detergents to achieve the desired cleaning effect.
Read the equipment’s instructions carefully. Attach the inlet hose to the proper pipe if the manufacturer specifies connecting to a cold water supply. Alternatives shouldn’t even be taken into consideration because they will undoubtedly damage the device.
It is simpler to connect a new machine with your hands if the house already had a washing machine installed. The hose only needs to be screwed into the previous outlet point. Next, you ought to unscrew the water supply tap and check for any leaks in the connection point.
The first time you connect the machine, things will be a little trickier. In the event that the cut-in pipe is absent, an outlet point will need to be set up. If you have the required tools, you can complete this task on your own; otherwise, call a plumber.
When utilizing your hands to connect equipment, be aware that:
- you need to take the hoses that come with the machine;
- you need to pay attention to the pressure in the pipe. The indicator should match the values recommended in the instructions.
Before beginning any work, make sure the water supply to the pipes is turned off. The top of the case’s rear panel has a hole where the inlet hose can be screwed on.
Most people who have access to basic tools and a little patience can easily install a Candy washing machine. You can make sure that your machine runs smoothly and efficiently by carefully following the steps.
You’re almost set to go as soon as you level the machine, check for leaks, and connect the water supply. Before you load it with clothes, remember to run a test cycle to make sure everything is working as it should.
Installing your washing machine correctly takes time, but it also gives you peace of mind and improves long-term performance. Savor the ease of use that comes with your recently installed Candy washing machine!
