Although disassembling an Ariston washing machine can seem overwhelming, it can be doable with the correct instructions. The ability to disassemble the machine correctly is crucial, regardless of whether you need to repair a specific problem or simply want to look more closely at the internal components.
Make sure the washing machine is unplugged and gather all required tools before beginning. Prioritizing safety over anything else will help prevent mishaps and protect the machinery.
This tutorial will lead you through the necessary steps to safely and successfully disassemble your Ariston washing machine, which will make maintenance and problem-solving simpler.
| Step | Description |
| 1 | Unplug the washing machine |
| 2 | Remove the top cover by unscrewing the screws at the back |
| 3 | Detach the control panel by carefully lifting it off after removing screws |
| 4 | Take off the front panel by unscrewing and gently pulling it away |
| 5 | Disconnect the door seal by loosening the clamp |
| 6 | Remove the drum by unscrewing the bolts and carefully pulling it out |
- Preparation for work
- Disassembling the Ariston washing machine
- Video on the topic
- complete disassembly of the Ariston washing machine
- How to disassemble the Ariston washing machine
- how to disassemble an Ariston washing machine with a stainless steel tank.
- We saw and glue a non-separable tank Ariston, Indesit, to replace bearings.
- HOW TO UNSCREW A COUNTERWEIGHT SPRING WITHOUT A SPECIAL KEY!!! ARISTON washing machine
Preparation for work
1. Cut off all communication to the washing machine.
- Disconnect from the electrical network;
- Unscrew the inlet hose;
- Disconnect the drain hose from the sewer (if it is connected permanently).
- It is better to drain the residual water from the tank in advance using a drain filter or a tube next to it.
2. The location you select must have adequate free space to hold the washing machine as well as the components and parts that have been removed from it.
3. Get the required instrument ready. What we’ll need to dismantle the Ariston washing machine is:
- Screwdrivers (flat and not only) and (or) a screwdriver with a set of bits of different configurations;
- A set of wrenches;
- Pliers;
- Hammer and wooden block;
- A bearing puller would be useful (if the washing machine is disassembled for their replacement);
- Hacksaw for metal and silicone sealant.
Disassembling the Ariston washing machine
You must first take off the top cover. Take out two of the back screws. The cover is drawn up and in your direction.
– Take out the screws holding the rear wall in place. It is taken out. This makes the drive, the heating element, and the back of the tank accessible.
– The belt that connects the drive motor to the drum pulley must be removed. The bolt with the star configuration fastens the pulley itself. To unscrew it, you will need the appropriate bit. The bolt clings firmly. However, if you move it first, everything else will go smoothly. With a wooden block, the pulley can be fixed.
– Cut the terminal blocks off from the engine. After removing the bolts holding the engine in place, the engine is then taken out of the machine’s tank.
– Take out the heating element’s contacts. Turn the middle bolt loose. And remove the heating element from the washing machine tank’s body with caution.
It is very easy to remove the drain pump and the "snail" through the machine’s bottom. It must be positioned sideways. The drain hose and pipe are already divided. There will be a certain amount of water released. You must get ready for this ahead of time. Cut the wires that are connected to the drain pump. The pump still needs to be removed after the fastening screws are undone.
Actually, all of the parts of the machine—such as the shock absorber mounts, wires, and tubes—that are capable of supporting the tank from below must be disconnected.
– Take the powder tray off.
– Remove all of the screws holding the control panel of the washing machine. The panel can be fully removed by disconnecting the wires if needed, or it can be left hanging on the side wires.
– After removing the bolts holding the upper concrete weight in place, remove it.
– Take out the powder and conditioner dispenser’s body. To accomplish this, take out the screws on the washing machine’s rear. Where the inlet of water is. After taking the dispenser out, set it aside.
You can now take the pressure switch off. The water level sensor is another name for it. It is supported at the top by the washing machine’s body. You must unplug the wires from it and the tube (after making a note of or taking a picture of their exact location).
In a similar manner, unscrew the screws and cut the wires to remove the inlet valve.
– Open the washing machine’s hatch door. The rubber cuff needs to be taken off of the front wall’s body. Take a flat screwdriver and pry up the cuff clamp’s spring. Circling the clamp will help. Push the rubber band inward after removing it from the front wall.
– Disconnect the power supply wires and remove the hatch lock’s wall-mounted fasteners, such as screws or latches.
We now proceed to the machine’s base. Take out the ornamental panel, if any. Locate every screw holding the front wall in place on models that have it removable. They may be found on the side or bottom of the machine body, beneath the plastic panel, or close to the drain filter.
– Take out the last few screws on top and take the wall apart.
You can now take the front weight off. Shock absorbers are detached from pipes and the washing machine tank (secured with plastic pins that have latches). The springs that support the tank should be removed last.
Consequently, the drum and tank are taken out of the machine. You can pull the tank out through the top if you suddenly have a modification with a non-removable wall (or you just don’t want to disassemble it).
Although disassembling an Ariston washing machine can appear difficult, it is doable if you follow the correct procedures. To ensure safety, begin by unplugging the machine and draining any remaining water. Keep in mind that paying close attention to every component, from the drum to the control panel, will help to prevent damage and facilitate reassembly.
Keep an eye out for screws, bolts, and other small parts as you work. You’re more likely to reassemble everything correctly if you take a methodical approach to disassembly. During this process, you should take advantage of the excellent opportunity to check the parts for wear and tear so that any issues can be addressed before they get worse.
Finally, it will take time and careful attention to detail to reassemble the washing machine. This step will be simpler if you follow the disassembly instructions in reverse order and refer to any pictures or notes you took. You can be sure that the machine will operate correctly once it is put back together and be prepared for the next load of laundry.
Ariston washing machine disassembly involves a lot of fine detail work because internal parts must be accessed by removing front or rear panels, the control panel, and the top lid, among other components. You can safely and effectively disassemble the machine for repairs or maintenance by using a step-by-step procedure, which also protects any delicate parts from harm.
