How to connect and install an Indesit washing machine

Although setting up a new Indesit washing machine can be a daunting task, it is an exciting purchase. For the machine to operate smoothly, whether you’re upgrading from a previous model or are a first-time owner, the correct connection and installation are crucial.

Thankfully, the procedure isn’t as difficult as it would appear. You can quickly set up your washing machine with a few simple tools and instructions. Everything you need to know, from setting up the machine to connecting the water supply and making sure it’s level and secure, will be covered in this guide.

You can prevent common problems and make sure your Indesit washing machine keeps working at its peak for many years to come by following these simple instructions.

Where to put the machine?

It would have made sense to provide an answer to the query regarding the new washing machine’s intended location even prior to its purchase. This choice will determine whether the unit needs a removable cover and what measurements are required. However, it is not hard to "arrange" the washing machine even if you don’t have any prior ideas because you can experiment and move the first location that you chose. There aren’t many placement options, though.

1. Bathroom. The most popular and optimal option due to available “outputs” to communications and convenient use. It does not interfere with the installation of a machine next door to the bathroom and a small area of ​​the room: there are compromises with the embedding of the machine under the sink or the purchase of compact "vertical" equipment. But there is a large “minus” – increased humidity that violates the norms for safe and prolonged operation.
2. Kitchen. Many choose built -in models to install them in a kitchen set or have a new unit next to the refrigerator. This choice is good with ventilation functioning at full capacity, normal humidity and the presence of free space.
3. Hallway and storage rooms. If there are empty niches in the corridors, then they can also be used to place the washing machine. It is even better to “hide” the assistant behind the door or in a closet.

There are less well-liked choices as well. Hostel residents are forced to install the washing machine in the dining or sleeping area because there aren’t any other places for them to go.

Everything is dependent upon the features and capacities of the apartment design.

What matters most is that the following prerequisites are satisfied:

• water supply and sewerage are nearby or easily connected;
• the nearest moisture-resistant outlet is no more than 1-1.5 meters away (this is the average length of the cord);
• the floor does not bend or tilt (concrete or tiles are best);
• the door opens freely, and there are no problems with access to the control panel and powder receptacle;

Feel free to plan to add a new "tenant" to the interior if using the washing machine is not hindered. If required, attach the sewer line to the designated area. Following the ultimate decision, we move on to the following phase, which is installation and connection preparation.

Mandatory preparation of the machine

Clear manipulations such as reading the instructions, unpacking, and removing the foam frame, film, tape, and other items that shield the machine body during transit are the first steps in instructions on how to install it correctly yourself. The next step is to remove the transport bolts and insert special plastic plugs into the "voids" that are left behind. The latter are invariably contained within the kit.

Lastly, we relocate the device to the planned installation location. It is not worth putting it next to the wall, beneath the sink, or in the kitchen cabinet right away; you must first connect and disconnect all communications. As routine cleaning will become more challenging in the future, residents who value cleanliness can clean the floors in the designated area. Taking care of a tool case beforehand is advised.

Let"s organize the drain

We must first arrange the drain and then the water supply in order to fully connect our machine to the water supply and sewerage system. Let’s set up the drain first. Here, there are various variations:

• connect to the drain pipe through a siphon, for this we put the hose on the siphon and securely fix it with a metal clamp;
• connect the drain and the pipe directly, insert a special rubber cuff into the sewer and stick the washing machine hose into it;
• use a container, the simplest, but not convenient and not aesthetic way, when the hose is hung on a bathtub, toilet, sink or deep basin. Suitable as a temporary or forced measure.

Kindly take note! It is not advised to extend the drain hose with nozzles if it is not long enough to connect to the sewer; instead, the supply pipe must be extended.

In any case, start by reading the machine’s instructions. The maximum hose height that can be connected is specified in the technical documentation for some models. The minimum mark is typically 50 cm from the floor, but it is best to double-check the technical passport’s measurement.

We organize the water supply of the machine

Establishing the "connection" with the water supply is the next step. For these reasons, a dedicated inlet hose is supplied. Since it can occasionally be bought separately, it is crucial to confirm that it is included in the factory kit as soon as possible.

1. Find the curved end of the hose and screw it to the washing machine.
2. Inspect the water pipe and look for the wiring to the machine (a special branch with a tap or a separate pipe).
3. If there is none, we do it ourselves: unscrew the flexible hose and screw in the tee.
4. If you need to connect hot water, repeat the steps with the second supply.

Additional keys are not required for tightening the clamps. Water supply joints are fastened with plastic nuts that are manually tightened.

We make different decisions if the automatic washing machine is installed in a private home without a running water supply. First, attach the inlet hose to a water tank that is suspended between one and three meters above the ground. Purchasing and establishing your own pumping station is the second.

The body must be level

The Indesit machine must be installed correctly and oriented relative to the floor. The machine will only be stable in this manner, which will get rid of the loud vibrations, knocking, and "jumping" around the room. Ignoring this step will make the unit break down more quickly and require repair, even with automatic imbalance control.

Because the legs are adjustable, alignment is made possible even on uneven floors, allowing for straight lines. This is how the adjustment procedure appears:

• put a building level on top of the washing machine and, using it as a guide, unscrew or screw in the legs;
• lower your hands on the corners and slowly rock the equipment (if there is no vibration or strong rocking, everything is done correctly, otherwise, go back and repeat the adjustment);
• tighten the fixing nuts on the legs, using a suitable wrench.

Setting the mode to maximum spin is the best way to test it. The unit shouldn’t be able to move in space on its own, not even at very high speeds. It won’t be unnecessary to use the specialized vibration-smoothing attachments available at supermarkets and service shops.

An Indesit washing machine doesn’t have to be difficult to connect or install. You can quickly get your machine up and running and ensure that it runs well and lasts for many years by following the correct steps.

Paying close attention to details is essential, from correctly positioning the machine to connecting it to power and water supplies. Every wash will go more smoothly if you take the time to check for leaks and make sure the machine is level.

Understanding the fundamentals of installation will give you confidence in the configuration and functionality of your new washing machine, whether you’re doing it yourself or getting assistance.

Placing the machine, connecting it to the water supply and drainage, and making sure it’s level to avoid vibrations are the simple steps involved in connecting and installing an Indesit washing machine. Without the need for expert assistance, you can quickly get your washing machine up and running by following a few easy steps.

Video on the topic

Connecting an Indesit washing machine.

Indesit washing machine (Indesit). How to install and connect.

Connecting an Indesit washing machine. Washing machine review.

How to install a washing machine, connecting a washing machine to a water supply. Video tutorial Plumber