How to clean the conditioner compartment in a washing machine?

Although it may seem like a small chore, cleaning the washing machine’s conditioner compartment is essential to maintaining the freshness of your laundry and the efficiency of your machine. Fabric softener, detergent residue, and other buildups can clog the compartment over time, reducing the effectiveness and caliber of your wash. Not only does routine maintenance guarantee superior cleaning outcomes, but it also prolongs the machine’s lifespan.

We’ll go through how to clean this frequently disregarded area of your washing machine in this guide. We’ll go over everything you need to know, from taking out and cleaning the compartment to dealing with tough dirt. The ultimate objective is to assist you in keeping your washer clean and functioning properly so that your laundry stays fresh and your machine performs at its peak.

The conditioner compartment of your washing machine needs to be cleaned on a regular basis to avoid musty odors and keep it operating smoothly. This tiny but crucial component is easily prone to gathering mold, debris, and detergent residue, which can negatively impact both the efficiency of your machine and the quality of your laundry. You can keep your washing machine operating at peak efficiency and guarantee that your clothes always come out cleaner and fresher by learning how to properly clean this compartment.

Removing the tray and disassembling the rinse aid compartment

Regular cleaning of the washing machine container is recommended, especially for the conditioner compartment. Otherwise, the tray’s surface will continue to harbor bacteria, dirt, and detergent. It is first necessary to remove the container itself, which is simple to do:

• pull it towards you until it stops;
• make sure that the tray does not move further;
• carefully continue to pull it towards you, while simultaneously pressing on the blue plastic tab (it is in the center of the detergent compartment);
• continue moving the tray until it is removed from the washing machine.

It’s much simpler to reinstall the detergent compartment; just evenly position and push it in.

You should be able to easily access the conditioner compartment after removing the washing machine’s tray. There’s a plastic component, a fairly basic get, at the top of this compartment. All you have to do is pull it cautiously. Following that, you can start cleaning the container’s desired cell right away.

Soaking the powder receptacle parts

Soaking the washing machine tray beforehand is advised because cleaning the machine immediately after removal is challenging. There are some recommendations that should be considered when doing this. If not, all of your efforts will be in vain because scale and plaque are difficult to remove because they stick to the container material so firmly. How should the washing machine tray be soaked?

1. Take a sufficiently deep container and fill it with hot water (about 60 C).
2. Pour 250 grams of citric acid into the liquid (you need a lot of it to make cleaning more effective).
3. Place the compartment for washing powder in the container so that it is completely hidden in the previously made solution.
4. Leave for a long time (about 1.5-2 hours).
5. Take out the container and start cleaning it.

Use vinegar instead of citric acid if you don’t have any. In this instance, each deep basin of water will require at least 100 ml. Even though the acid has a strong destructive effect, successful cleaning will require a lot of work on your part.

It’s also important to consider the water’s temperature. The plastic will be harmed if the container is submerged in an extremely hot liquid. If you place it in boiling water, it will simply deform.

We persistently clean

The crusts in the container will break after being submerged in the acidic solution for so long. Compared to dry form, it will be much simpler to remove them after this. You will need to put in a lot of effort to clean the compartment entirely, but they will come off partially on their own. The best tools for removing scale are sharp wooden objects. These can be sturdy chips or chopsticks.

Crucial! Knives, forks, and other pointed metal objects cannot be used to remove the deposits since they could cause major harm to the air conditioner compartment.

Grab any wooden stick and file it down. Following that, you can begin cleaning the container mechanically. Soak the tray once more if removing limescale deposits proves to be challenging. Rinse the compartment with water after all of the dirt has been removed, then replace it in its original location.

To keep your laundry fresh, make sure the conditioner compartment in your washing machine is kept clean. Fabric softener residue can accumulate over time and cause blockages and offensive odors. You can make sure that your washing machine runs well and that your clothes come out smelling good by cleaning this compartment on a regular basis.

Take the compartment out of the washing machine and give it a quick rinse in warm water to clean it. Scrub any leftover material with a gentle brush, being cautious to get into tight spaces. To remove tough buildup, soak the compartment in a solution of water and mild detergent if necessary.

Dry the compartment completely after cleaning it before reinstalling it in the machine. This kind of routine maintenance not only keeps your washing machine in excellent working order, but it also makes your laundry routine more efficient. For optimal results, make it a habit to inspect and clean the compartment every few weeks.

Video on the topic

How to WASH A TRAY IN A WASHING MACHINE from scale, from hardened powder, mold and dirt

How to clean a TRAY (compartment for powder) of a WASHING MACHINE

How to Wash a VERY DIRTY Tray of a Washing Machine from Scale, Hardened Powder, Mold and Dirt

Water does not drain from the compartment for the conditioner, what to do