Understanding how to clean the filter on your washing machine will help it stay in good working order. This is an essential maintenance procedure for Atlanta washing machines that guarantees smooth and effective operation of your equipment. Lint, debris, and other particles can clog the filter over time, causing poor performance or even damage.
A quick and easy way to prevent expensive repairs and prolong the life of your machine is to clean the filter. Including this on a regular basis in your cleaning regimen is a smart idea. We’ll go over the procedures you must adhere to in order to clean the filter in your Atlanta washing machine in this guide, making the procedure simple and doable.
You can make sure your washing machine stays in top shape and keeps providing the best washing performance by adhering to these simple steps. Are you prepared to begin? Let’s examine the specifics and maintain the like-new performance of your Atlanta washing machine.
| Step | Description |
| 1 | Turn off the washing machine and unplug it for safety. |
| 2 | Locate the filter, usually at the bottom front of the machine behind a small panel. |
| 3 | Place a towel or shallow tray under the filter area to catch any water. |
| 4 | Open the panel and unscrew or pull out the filter. |
| 5 | Clean the filter under running water, removing any debris or lint. |
| 6 | Reinsert the filter and secure it in place. |
| 7 | Close the panel and plug the machine back in. |
| 8 | Run a short cycle to ensure everything is working correctly. |
- We act step by step
- Removing stubborn dirt
- Video on the topic
- How to clean the washing machine WATER SUPPLY FILTER? IF THE WASHING MACHINE DOES NOT FILL WITH WATER?
- ✅Cleaning the Filter in a Washing Machine How to Clean It Yourself/ How to clean a filter in a washing machine
- How to clean a washing machine filter
- Cleaning a washing machine filter. Cleaning a washing machine drain pump filter. Instructions.
- How to clean a filter in a washing machine. What to do if the filter is clogged, stuck, and won"t unscrew
- How to clean a drain pump filter in a washing machine
We act step by step
Like all washing machines, the Atlant model has two filters: a drain spiral and an inlet mesh. The first one is found in the inlet hose and purges the water supply of impurities, rust, and sand. The second one is located in the drainage system and is used to gather any debris that enters the drum with the cleaned items.
At minimum, once every three months, cleaning the drain spiral is advised if the mesh filter becomes unclean for an extended period of time. In actuality, hair, lint, threads, coins, and hairpins enter the washing machine with the laundry and end up in the tank and drain system. More debris accumulates over time, clogging the hole and preventing water flow. Luckily, the "garbage can" keeps this "treasure" from getting any closer and clogging the impeller or pump.
Cleaning the spiral is a task that can be completed by anyone and takes no more than 30 minutes. The most important thing is to remove the filter correctly and to remember to take safety measures. The guidelines are as follows:
- find the technical hatch located in the lower front part of the case;
- unhook the bow from the case using a screwdriver or a knife;
- move the machine away from the wall and tilt it back so that the front legs come off 5-6 cm from the floor;
- place a container, for example, a basin, under the filter (even if the drum is empty, some water remains in the pipes and tank, which will spill out onto the floor when the filter is unscrewed);
- holding the protruding part, unscrew the filter clockwise.
Then, clean it after removing the filter. After using your hand to remove any large debris, wash the nozzle with soapy water. Remember to clean the seat as well; it is meticulously cleaned of debris and scale. It is important to take care of the pump and not be slack: run a clean rag over the pump, remove the hair that has coiled around the impeller, and shine a flashlight through the hole. A similar scheme, but in reverse order, is used to return the filter.
After a high-temperature wash, you can’t remove the filter right away because the leftover water won’t have time to cool down and could burn you!
You can clean the inlet in addition to the garbage filter. Using pliers or tweezers, locate the filter mesh and unsnap the inlet hose from the housing. After rinsing the component under the faucet, put it back in its proper location.
Do a test wash after cleaning the filters. Choose the "Rinse" program and watch the machine operate. Everything is done correctly if the set and drain function without any issues. You will need to unscrew the garbage filter once more and tighten the clamps if leaks happen.
The filter in your Atlanta washing machine can become clogged with debris, lint, and detergent residue, so it’s imperative to clean it on a regular basis to keep it functioning smoothly. This easy maintenance step keeps your laundry clean and fresh while also averting potential damage and offensive odors. We’ll go over the exact procedure for cleaning the filter in your washing machine in this guide, so you can do it yourself and keep your machine operating at its best.
Removing stubborn dirt
Rinsing the attachments under water is insufficient if the filters’ last cleaning was done a long time ago. You’ll need to use "heavy artillery" to get rid of rust or a thick layer of scale. The most important thing is to choose the appropriate products and avoid going overboard to avoid damaging the sealing rubber and plastic.
Use of toothpaste and laundry soap can help with minor plaque removal. The spiral must be treated with the product and then carefully brushed clean. In more complex situations, there’s a more efficient way:
- dilute 20 g of soda and 50 g of citric acid in a liter of warm water;
- immerse the filter in the solution for 15-30 minutes;
- take it out, wipe it with a rag and rinse it in cold water.
The drainage filter cannot be washed in hot water because the material will distort at such high temperatures!
You can use specific store-bought compounds in place of homemade remedies. To make washing the spiral by hand easier, some advise beginning a high-temperature cleaning "idle" cycle prior to unscrewing the garbage filter. You must always keep an eye on the dosage.
An easy yet crucial maintenance task that can keep your Atlanta washing machine in good working order is cleaning the filter. You can minimize wear and tear, avoid clogs, and guarantee that your laundry comes out as fresh as possible by routinely inspecting and cleaning the filter. Recall that a clean filter also makes your machine function more effectively, ultimately saving you money on energy and maintenance expenses.
The procedure is simple in and of itself. The majority of Atlanta washing machines have readily accessible filters that are simple to take out and clean. Just be careful to adhere to the manufacturer’s instructions, as the filter’s location and design may differ. Usually, you’ll need to shut off the machine, remove the filter cover, and carefully clear out any accumulated lint or debris.
The secret is to maintain things regularly. You can avoid problems by checking the filter every few months, or more often if you have a large household or do a lot of laundry. It’s worth including filter cleaning in your routine cleaning because it makes your washing machine work better and last longer. It only takes a few minutes.
