How to clean a Bosch washing machine from dirt?

Maintaining the optimal condition of your Bosch washing machine is crucial to extending its lifespan and preserving its efficiency. The performance of the machine and the quality of your laundry may be impacted over time by the accumulation of dirt, detergent residue, and even mold inside the appliance. Maintaining regular cleaning keeps your washer operating smoothly and helps to prevent these problems.

We’ll walk you through a few easy steps in this guide to properly clean your Bosch washing machine. These tricks will help you maintain your washer functioning like new, from clearing away grime and soap scum to eliminating musty smells. You only need a few commonplace items that you most likely already have at home, no specialized equipment or harsh chemicals.

Whether your washing performance has decreased or you simply want to give your machine a routine tune-up, these simple cleaning methods will make the process simple and hassle-free. Let’s get to work shining and optimizing the performance of your Bosch washing machine!

Where impurities accumulate?

The washing machine eventually gets dirty despite being in constant contact with water and detergents. Furthermore, even the so-called "clean" liquids have a "dirty contribution" to make: the soap stays in the dispenser and drum as a film, and the water supply’s limescale deposits itself on the hoses and heating element. High humidity, room dust, and debris and lint falling from objects aggravate the situation.

Bosch gets filthy both inside and outside, but certain areas are more susceptible to buildup of debris than others. Therefore, the powder container, pump, cuff, drain filter, and tank bottom should all receive extra attention.

Every six months, experts advise giving the washing machine a thorough cleaning!

1. Drain filter. It is also called a trash filter, as it catches 90% of the debris that gets into the washing machine. This is dirt, objects that accidentally get into the drum, hair, threads and paper. It is imperative to wash it at least once every six months.
2. Hatch cuff. The rubber seal has several folds in which debris from things, soap scum and water accumulate. If the rubber is not regularly wiped dry and cleaned of dirt, it will turn black, become moldy and begin to smell bad.
3. Pump. The impeller of the pump takes on the remaining 10% after the drain filter – hair, lint and other debris sticks to the blades, blocking the operation of the device. If there is a lot of dirt, the device breaks down, and washing becomes impossible.
4. Powder receiver. Often, undissolved detergent remains in the tray, which, together with dust and limescale from the tap, settles on the walls of the bunker and solidifies. Also, mold often “settles” in the cuvette.
5. Bottom of the tank. The trash from the drum “falls” to the bottom of the tank, and soap scum and residual water settle here. It is difficult to get to such “treasures”, but you should not neglect cleaning the bottom.

It is simpler to plan the procedure and expedite cleaning when you are aware of the areas of the washing machine that are the dirtiest. It is preferable to tackle the complex—the pump and tank—after finishing the simpler tasks, like cleaning the filter, tray, and cuff. It’s all very simple to do; any housewife could manage it.

Maintaining the cleanliness of your Bosch washing machine is crucial to preserving its functionality and increasing its lifespan. We’ll take you through easy, efficient methods in this post to clean your machine of filth and grime. You’ll discover simple techniques to make sure your washing machine functions properly and maintains its freshness, from cleaning the detergent drawer to dealing with the drum and seals. Frequent maintenance helps avoid potential repairs and offensive odors in addition to enhancing washing performance.

Let"s start with the “trash can”

The drain filter on Bosch washing machines is "hidden" behind a rectangular technical hatch in the lower right corner. It’s simple to access the "trash can" by pressing the plastic latches and prying open the door with a flat screwdriver. Finding the black plug and beginning the nozzle cleaning process are the only tasks left. The following is the algorithm:

• disconnect the washing machine from the power supply;
• tilt your body back so that your front legs are raised 5-7 cm above the floor;
• place a container under the garbage filter (the water remaining in the tank will be poured into it);
• find the emergency drain hose, pull it out and drain the water into a container.

Not every Bosch model comes with a dedicated drain hose. If it isn’t there, there is another method for emptying the tank completely: unscrewing the "garbage can." The guidelines are as follows:

• take hold of the protrusion on the plug and twist it from right to left;
• if the part does not feed – generously treat it with WD-40 lubricant;
• pull out the nozzle;
• inspect the vacated hole for dirt and debris (it is better to shine a flashlight and thoroughly clean the seat);
• clean off any debris stuck to the nozzle and rinse under the tap;
• return the "garbage can" to its place, screwing it in until it stops;
• close the filter with a decorative hatch.

The garbage filter should ideally be changed every three months. It is advised to perform "cleaning" on an as-needed basis after washing woolen knit items. The "trash can" needs to be cleaned once a month if there are dogs or cats living in the home.

Let"s pay attention to the tray

Moreover, the Bosch detergent tray is prone to dirt. Over time, powder that is not cleaned into the drum hardens and "grows" to the bin’s walls. The plaque gets thicker the longer the tray is left unclean. The unfortunate results include clogged pipes, granule-filled water that does not flow out of the dispenser, leaks, and subpar laundry. You must pay attention to the powder container after every wash in order to prevent this.

You can use vinegar, baking soda, or citric acid to remove stubborn dirt from the powder container.

It is simple to take out the dispenser. We act as follows:

• grasp the handle;
• pull towards you until it stops;
• squeeze the special “tongue” located in the center;
• pull out the tray.

Usually, all that is needed to remove any leftover powder is to give the bin a quick rinse in warm water. You will need to begin with soaking if this is your first time cleaning in a long time. Assemble a citric acid solution, then immerse the tray in it for one to two hours. The walls then need to be thoroughly cleaned with a toothbrush, rinsed, and dried.

It is easy to put the tray back where it belongs. Simply place the tray inside designated guides and push until it comes to a stop.

"Main" rubber band

The lower folds of the hatch cuff gather a lot of debris, ranging from soap and hair to a child’s sock stuck in there. You can’t leave it in the rubber band because mold and an unpleasant odor will grow there due to high humidity and no air conditioning. After every wash, it is preferable to look inside the drum, straighten the rubber band, and remove any extra material.

Periodically performing a more thorough cleaning is advised:

• treat all the folds of the cuff with bleach;
• close the hatch door;
• leave the product "to work" for at least 30 minutes;
• then rinse with water by hand or run a quick wash;
• then wipe dry.

To clean the cuff, use a soda or lemon solution instead of bleach. Preventing caustic acids is crucial as they have the potential to erode the rubber seal. Don’t forget to wear safety glasses and gloves for your own protection.

Let"s take care of the pump

It’s more work to get to the pump because you have to disassemble the machine and the pump partially. The washing machine must first be unplugged from the electricity, water, and sewage supplies before it can be moved away from the wall. The algorithm then looks like this:

• remove the powder receptacle;
• unscrew the two screws hidden behind the tray;
• loosen the bolts along the perimeter of the dashboard and disconnect the board from the case (you do not need to completely disconnect the module, it is enough to hang it on the side or put it on top);
• pry up the door of the technical hatch and put it aside;
• remove the outer clamp from the cuff and tuck the rubber inside the drum (you do not need to completely pull the seal – it is very difficult to return it back);
• turn off the UBL;
• unhook the front panel from the washing machine;
• drain the water from the machine.

The drain pump is now located in the lower section of the structure. We will swing it out of the machine by unscrewing the bolts that are holding it in place and disconnecting the wiring. Next, we begin cleaning: we remove hairs and threads from the impeller, clear the drainage surface of dirt, and clean the nearby snail. We then disassemble the component and clean its internal components.

The cleaned pump is put back together, put back on the snail, and fastened firmly. You cannot attempt to repair an impeller that is flying off the shaft or dangling during installation with sealant or glue. It is safer to swap out the entire pump.

To keep your Bosch washing machine operating at peak performance, cleaning is a simple but necessary task. Frequent upkeep aids in preventing the growth of mold, mildew, and offensive odors. You can maintain the best possible condition and continued performance from your washing machine by adhering to a few easy steps.

First, make sure the detergent drawer is clean and in order. In order to avoid soap buildup, which can impair the functionality of your machine, remove any residues or obstructions. After that, check the drum for any lingering dirt or stains and, if necessary, run a cleaning cycle. This will assist in keeping the drum clean and fresh from any residual dirt.

Remember to use the door seal. Regular cleaning will help to get rid of any water or dirt buildup. Since mold can grow in this area, keeping it clean and dry will help prevent odors. To make sure the filter isn’t clogged, which could cause drainage problems, it should also be cleaned and inspected on a regular basis.

You can maintain the performance and increase the longevity of your Bosch washing machine by adding these easy cleaning tasks to your routine. Maintaining your machine’s performance and ensuring hassle-free laundry days are both made possible with a little care.

Video on the topic

How to clean a washing machine from dirt and odor?

How to completely clean a washing machine from odor, mold, scale and dirt? TIPS FROM THE MASTER

DO YOU NEED TO CLEAN A WASHING MACHINE? 😲 Replacing bearings in a Bosch washing machine

Cleaning a BOSCH max 5 top-loading washing machine

How to clean a Bosch washing machine from odor and dirt

WE LOOKED UNDER THE RUBBER BAND IN THE WASHING MACHINE and saw THIS … How to clean a washing machine

HOW TO CLEAN A WASHING MACHINE from mold 😱