Is there more noise than normal coming from your Samsung washing machine? It may be time to inspect the shock absorbers if it is vibrating excessively or if you hear a loud banging sound while the spin cycle is in progress. These parts are essential for maintaining the stability and quiet operation of your washing machine because they reduce the vibration of the drum.
Shock absorbers may deteriorate with time, resulting in audible vibrations and noise. It’s not as hard as it might seem to check them, and by doing so, you can prevent future, more costly repairs by identifying possible problems early on.
In order to ensure that your Samsung washing machine continues to operate smoothly and silently for many years to come, we’ll walk you through the easy steps of checking the shock absorbers in this article.
| Step | Description |
| 1 | Unplug the washing machine and remove the back panel. |
| 2 | Locate the shock absorbers near the bottom of the drum. |
| 3 | Gently push the drum downwards to see if it bounces back smoothly. |
| 4 | If the drum moves easily without resistance, the shock absorbers may be worn out. |
| 5 | Check for any visible leaks or damage on the shock absorbers. |
| 6 | Consider replacing the shock absorbers if they seem worn or damaged. |
Are the installed shock absorbers faulty
It is crucial to take your time making repairs and buying new parts; instead, you should make sure that the shock absorbers are the actual cause of the issue. You must partially disassemble the washing machine in order to check. If you follow our instructions, you can do this on your own.
It is more practical to access the shock absorbers from the bottom of the washing machine because that is where they are located. De-energize the home appliance and gently place it on its side to accomplish this. You will need to take out the shock absorbers from the unique plastic holders at the ends of the racks using pliers. If you’re having trouble doing this, try lubricating them with technical lubricant like WD-40 first.
Do not force the fasteners; no one has cancelled safety precautions. It’s important to handle the system’s internal parts with caution and avoid using big instruments like hammers. If not, you risk inadvertently damaging the rack and any adjacent components, like a plastic tank. You must perform the following actions in order to inspect the shock absorbers for a malfunction:
- take the rack with your hands;
- gently press on the rod;
- try to pull it out of the body of the part.
Tension should be felt by the rack. You must ascertain its strength. standard compression with an amplification of 8–10 kg.
The rod is harmed if it effortlessly exits the body!
This element will be of no use in the battle against vibration in this scenario. This will negatively impact the floor covering as well as the equipment. It’s also critical to remember that other items that are dangerously close to the machine may sustain damage.
Examining the state of the racks—particularly the piston and the existence of shock-absorbing grease—should receive special attention. The unit needs to be restored if there is no technical fluid; this is an indication of wear and tear. Rust cannot be present in the shock absorber system for the same reason.
Replacing a broken part
You can begin replacing it after you have thoroughly examined everything and determined that the shock absorber unit is defective. Ideally, you should choose branded replacement parts rather than equivalents. They will last longer even though their price is higher. Furthermore, you won’t have any trouble locating the right size parts because you will receive them right away.
It occasionally happens that you continue to be unsuccessful in your search or that you must wait an excessive amount of time for the required part to show up. You ought to take a damper of a different brand in this situation. Please take note that the purchased part needs to fit the specified dimensions, fasten, and resistance. You should take a preliminary measurement of the mounting axes’ gap length in order to avoid being duped. You must take this measurement in both compressed and free states.
The next thing you should do is make sure the fasteners are appropriate for the washing machine you have. Typically, fasteners come in multiple varieties, including bolts, plastic pins, and latches. Once this is finished, it’s crucial to measure the shock absorbers’ resistance to make sure it falls between 80 and 120H. This is where the old shock absorber comes in handy. Its body must be examined in order to determine the specified value, which must then be compared to the necessary indicators.
You can install the newly purchased unit in place of the malfunctioning one after it has been purchased. After that, the washing machine must be put together while following the opposite order. Don’t rush to turn on the unit, though. The machine must first operate in an idle cycle. This will assist you in confirming that the vibration and sound issues have been resolved.
A Samsung washing machine’s shock absorbers can be manually tested by tilting the machine and applying pressure to the drum to see if it wobbles or bounces back too easily. You can also watch the machine during a spin cycle for any unusual vibrations or excessive noise. To stop additional damage and guarantee smooth operation, it might be time to replace the shock absorbers if the drum moves too freely.
Restoring the shock absorber
Some users prefer to fix their shock absorbers rather than replace them because they lack the courage to do so. There are benefits to this, for sure: you save money and don’t have to waste time hunting for an authentic part. That being said, there’s no assurance that the device won’t break down once more in the future. Please follow these instructions if you’re still determined to fix the shock absorbers yourself.
To begin with, you must determine the bushing hole’s diameter. One tool for doing this is a caliper. After that, you should proceed in accordance with the measurement: cut off a piece of rubber, keeping in mind that it needs to be at least three millimeters thick. Another option is to use a leather belt or a brake shoe.
- remove the plastic retaining ring along with the worn gasket;
- replace the removed seal with the piece of rubber you created (the edges should meet here);
- do not skimp on the grease and thoroughly go over the part with it;
- insert the damper rod into the seat.
You must lubricate the component before inserting the rod. Using the appropriate lubricants is crucial in this situation. They must be sufficiently viscous and exhibit excellent resistance to moisture and high temperatures.
You can prevent more serious problems later on by performing routine shock absorber checks on your Samsung washing machine. It’s wise to have a look at the shock absorbers if you hear odd noises or feel strong vibrations.
You can tell if the shock absorbers need to be replaced because they are worn out by following a few simple steps. Your washing machine’s lifespan can be increased and its smooth operation maintained with this little maintenance effort.
Keep in mind that taking care of issues early on can save expensive repairs and guarantee your appliance continues to function well for many years to come.
