How to change the shock absorbers in a Beko washing machine

Although replacing the shock absorbers in a Beko washing machine may seem difficult, you can do it yourself if you take the proper approach. Shock absorbers are essential for maintaining the balance of your washing machine during the spin cycle, which lowers noise and vibrations.

You might experience severe shaking, loud banging noises, or even the machine moving out of position when these parts wear out. You can increase the longevity and stability of your washing machine by replacing the shock absorbers.

Make sure you have a new set of shock absorbers and the required tools before you begin. You can replace them and restore the smooth operation of your washing machine by following this guide.

What elements will we change?

Without consulting a professional, you can replace the Beko washing machine’s shock absorbers on your own. For the task, a minimal set of tools will be required. It’s critical to heed the advice and not stray from the suggested course of action. It is necessary for you to become familiar with the automatic washing machine’s rack structure and working principle before beginning any repairs.

Friction dampers, which are fitted in Beko washing machines, are made up of multiple parts.

What makes up the Beko washing machine damper is:

• housing;
• piston;
• movable pad (the spacer is fixed through it);
• spacers;
• guide;
• sliding surface.

The damping body is not moving. The piston-pusher protrudes slightly from the shock absorber’s "shell." All elements are guaranteed to move in the correct direction by the guide.

Resistance is produced as the damper’s components move. The entire "impact" is eliminated by the mechanism as it progressively dampens the tank’s vibration. The Beko washing machine racks are designed without return springs, ensuring that they last for approximately 5-8 years before needing repair.

Standard shock absorbers on older Beko models are made up of a housing, a cylinder, and a moving rod. Rubber bands that have been sealed and lubricated with a unique compound are also part of the design. The gaskets offer the perfect sliding to reduce vibration.

The damper is fastened to the automatic machine’s body from below using a silent block. A pusher-piston that can be moved is screwed into the washing machine tank from above. To guarantee longitudinal movement, sliding supports are positioned adjacent to the shock-absorbing components. In order to prevent axial displacement, they are fixed with keys.

Are these parts really out of order?

Original Beko automatic machine dampers have an average service life of 5-8 years. While some shock absorbers last for many years, others only last for two to three years. The washing machine’s operating conditions and assembly quality have a significant impact.

The following are essentially the causes of shock-absorbing element breakdown:

• mechanical wear;
• damage due to prolonged loads and constant vibrations;
• washing out grease from the shock absorber housing;
• violation by the user of the operating rules of the Beko washing machine (overloading the machine, installing it incorrectly, on an uneven floor, etc.)..

Careless washing machine use is the primary cause of the dampers’ premature wear.

What does it mean to use the washing machine carelessly? exceeding the weight limit for the permitted load, spinning at top speed, and washing the drum unevenly. The dampers’ service life is shortened by each of these elements. The following indicators indicate when new shock absorbers are needed:

• the body of the automatic machine wobbles and vibrates, which is especially noticeable during spinning;
• a loud knock and rumble is heard when the washing machine is running;
• the machine "jumps", moving from its installation location;
• the drive belt often falls off the pulley;
• a leak is observed from under the door (the drum hits the body of the washing machine, the sealing cuff of the hatch is damaged, liquid begins to seep through it).

Any of these "symptoms" could point to shock absorber issues. These symptoms, though, can also indicate other problems. Therefore, diagnostics are essential.

Examining the shock absorption system with your hands is a very simple process. The washing machine body’s top panel must be removed. The tank must then be sharply released after being pressed firmly. The dampers are functioning properly if the container slides into position. The need for new racks will be indicated by a drum that swings erratically.

You will need to check the dampers if, following such a check, the tank "sways" for an extended period of time and won’t stop. The racks are below; you must partially disassemble the washing machine case in order to remove the shock absorbers. We’ll walk you through the process.

We get to the shock-absorbing mechanism

The washing machine must be disassembled in order to remove the shock absorbers. The first task is to get the washing machine ready. De-energize the washing machine and disconnect it from the communications network before beginning any repairs. After removing the machine’s inlet and drain hoses from the casing, center the machine in the room.

The following is the additional action algorithm:

• having unscrewed a couple of screws, remove the top panel of the case;
• pull out the powder receptacle;
• remove the bolts securing the control panel;
• disconnect the dashboard from the washing machine case (carefully so as not to damage the wiring);
• lay the washing machine on the floor, on the back wall;
• unscrew the screws securing the bottom of the machine;
• open the hatch, remove the outer clamp of the cuff;
• insert the sealing rubber into the drum;
• disconnect the wires from the hatch locking device;
• remove the front wall of the case.

The dampers are visible once the front panel has been taken apart. Experts recommend disassembling the washing machine all the way down to the tank before removing the racks. Self-taught artisans advise, however, streamlining the procedure and eliminating the shock absorbers at this point, while the machine is in a horizontal position.

Your Beko washing machine’s ability to reduce noise and vibration can be greatly improved by replacing the shock absorbers. If you take your time and follow the correct procedures, it’s an easy process.

You can save money on repair costs by doing it yourself if you have the necessary tools and a little perseverance. Just be careful handling the parts and remember to turn off the power before starting.

Your washing machine should function more smoothly and last longer after the shock absorbers have been replaced.

In order to restore the machine’s stability and lower noise levels while in use, changing the shock absorbers in a Beko washing machine is an easy procedure that entails disconnecting the appliance, taking off the back panel, and carefully replacing the worn shock absorbers with new ones.

Video on the topic

How to replace shock absorbers in a washing machine!

Replacing a shock absorber in a washing machine

Replacing shock absorbers in a washing machine. Repair nearby

How to change shock absorbers in a washing machine.

Replacing shock absorbers on a Beko Wrs 55P2 BWW washing machine