Height of installation of a water outlet for a washing machine

A washing machine requires more setup than just putting it in a handy location. For the machine to operate correctly and effectively, the water outlet must be installed correctly. An excessively high or low outlet can cause problems like poor drainage, water backflow, or eventually even damage to the machine.

Knowing the appropriate height for the water outlet can help you avoid future problems and expensive repairs. This guide will assist you in determining the proper height for the water outlet on your washing machine, resulting in a longer-lasting and smoother appliance.

Accurately measuring the water outlet height is essential when installing a washing machine. Should it be too high, the machine may have trouble pumping out water, and if it is too low, drainage issues may arise. A proper height guarantees effective operation and averts possible problems, resulting in a hassle-free and easier laundry experience.

What is a water outlet and what are its advantages

Tee taps were the primary means of connecting washing machines in the past. This is useful, but only when there is exposed pipework. Such a solution is not appropriate if the pipes are run inside the walls, tucked under panels, or laid in a box. You require a water outlet here.

This is essentially one kind of plumbing fitting that is used. Although there are other designs, the most basic one consists of an elbow with threaded sections for connecting to the consumer and main line and ears for wall mounting. This elbow is installed in the designated location using dowels, and a water pipe is attached to it. Only the threaded portion meant to connect a washing machine and other home appliances peeks out from the wall after sealing.

Installing water supply sockets for washing machines is a sensible solution that offers several noteworthy benefits, including:

• ease of installation;
• household appliances are connected after the end of the repair, which guarantees its safety;
• The most simple process of replacing or transferring technology.

This is incredibly handy because it only needs to be fixed once, multiple outlets installed, and washing machine replacements as often as the family budget permits.

Types of hydrogen

Accessories for every budget and taste are available in the modern market. With pricey and superior repairs, you can now purchase a chic model that looks great in the bathroom and isn’t necessarily a crude square with ears.

They differentiate based on the kind of connection to the highways:

• single models;
• paired hard;
• paired on the bar.

The first kind of water outlets is typically installed on the cold water main line and is limited to one main line. These are dishwasher and washing machine plugs. The other two, which are directly connected to the hot and cold pipelines, are meant for mixers.

For these fittings, the following materials are utilized:

• steel and plumbing cast iron;
• copper-based alloys;
• plastic and composite materials.

Models composed of various metals, such as brass, bronze, and stainless steel, appear impressive and have a longer service life. You’re stuck with cheap plastic if the washing machine’s socket is concealed behind its body.

Classification of sockets by design features

The solution to the age-old dilemma of washing machine water socket selection has long since been discovered. All of their technical details, such as material, shape, and type, must be considered, but the connection method to the main line should be considered first. In this case, you should pay close attention to how your water supply is set up, the type of pipes, and whether a specific tool is available.

Threaded models

Threads are used, as the name implies, to connect these products. This is a tried-and-true technique. Such a socket is made of premium materials and is assured to last for many years. A water socket with threads is:

1. long service life;
2. excellent tightness;
3. strength and reliability;
4. easy installation.

No special tools are needed to install a threaded water socket; even a novice craftsman can do it. Detachable connection is an additional benefit. It is simple to separate the socket from the pipeline, disassemble it, and replace it if needed.

Crimp water sockets

Crimping is the method used to connect the water supply. The collet, a unique sleeve that guarantees the dependability and tightness of the joint, is the fundamental component of the product. Even though these models are relatively new, they offer several noteworthy benefits.

• low cost;
• long service life;
• easy installation;
• wide range of models;
• possibility of dismantling and reinstallation.

Although installing this type of water socket requires a little more skill than its threaded equivalent, no special tools are needed.

Self-locking

This kind of socket stands out due to its easy connection. Fixation uses a variety of locks that are simple to close, hold the pipe firmly, and are simple to disconnect if needed. Benefits of these products:

• completely disassemblable design;
• possibility of reconnection;
• easy installation;
• versatility.

It’s crucial to verify the joint’s dependability after attaching these pieces. Check for leaks carefully, using a napkin if needed.

Sockets for soldering

A specialized soldering iron is used to join these water sockets to a plastic pipe. The joint is steady, dependable, and even. Benefits of this approach:

1. minimum of parts used;
2. compactness;
3. long service life;
4. tightness;
5. low cost;
6. versatility.

Although this is one of the easiest ways to fasten, there are some disadvantages to it as well. First of all, you will need to cut the pipe if you need to replace the connection because it cannot be separated. Furthermore, specific tools will be needed for installation.

Choosing a place for installation

Selecting the best location is the first step in the installation process. This is a significant occasion, arguably just as significant as the installation and pipeline connections. The location needs to fulfill several prerequisites.

1. Distance to the washing machine. The hose should freely reach the outlet, not be stretched, but not sag too much.
2. Height. Determined by the dimensions of the washing machine. Experts recommend stopping at the standard value of this parameter, namely – 77 cm from the floor. At the same time, the numbers may vary depending on the parameters of the system and the model of the washing machine.
3. Access to shut-off valves. The tap shutting off the water supply to the machine must be within reach.
4. Reliability of the socket mounting. The supplied fasteners are used to fix the water socket; if necessary, they can be reinforced with corners or pads.

Furthermore, it is imperative to guarantee user-friendliness. The socket needs to be reachable so that you can quickly connect or replace the hose, or stop the washing machine’s water supply, if needed.

Methods for fixing the water socket

There are numerous widely used techniques for socket repair. The type of wall, the characteristics of the water supply in a specific apartment, and the height at which the outlet is placed all influence which option is best. In any case, you have to take a close look at the wall surface where the installation is to be done before you begin. There shouldn’t be any gaps or fractures that could cause the fitting to come loose and leak as a result.

Installation "in a pocket"

This technique can be used when installing a water socket on a wall made of concrete or solid brick. The size of the socket determines the creation of a recess. The fitting can peek out; it’s not necessary to cover it completely; this way, it can be "played up" when the job is finished.

After using complete parts to fix the socket, finish the walls.

On a wooden gasket

When it is not possible to create a complete "pocket" and firmly fasten the socket due to thin walls (4-6 cm), an alternative technique is employed. Create a tiny indentation; the fitting is fixed to a board that is 0.5 cm thick. An antiseptic must first be applied to the wood. In the groove, the gasket is fixed.

Installation on a lining

This technique is applied to plasterboard walls. It is undoubtedly not possible to attach the socket to the sheet directly; a support must be built first. As a result, a metal profile or a wooden frame are used. Its configuration and shape are decided upon separately.

The completed frame, which will serve as the foundation for the water outlet, has a wooden gasket installed on it.

Installation Height	Description
40-60 cm	This is the recommended height range for most washing machines, ensuring efficient drainage without causing overflow.
Below 40 cm	If installed too low, the water might not drain properly, leading to potential flooding or machine errors.
Above 60 cm	Installing the outlet too high can cause the washing machine to work harder to pump out water, potentially shortening its lifespan.

It’s essential to install the washing machine’s water outlet correctly to guarantee effective operation and avert future problems. Achieving the ideal height can significantly impact your machine’s ability to remove water and prevent backflow issues.

It’s crucial to attach the water outlet according to the manufacturer’s instructions and to take your laundry area’s layout into account. By taking the time to do the installation correctly, you can avoid headaches in the future.

Recall that a properly installed water outlet is essential to maintaining the smooth operation of your washing machine, preventing expensive repairs, and guaranteeing that your laundry routine remains hassle-free.

Video on the topic

AT WHAT HEIGHT TO MAKE WATER PIPE AND SEWAGE CONCLUSIONS UNDER THE SINK

Water outlets, World standards

Washing machine connection unit.

HOW NOT TO MAKE PLUMBING IN AN APARTMENT? #225

Ideal water and sewage outlet. How to do.

Standard height of water outlets and sewage

At what height to make conclusions in the bathroom?