It’s always a thrill to get a new washing machine, especially from a reputable brand like LG. Understanding how to handle that first wash is crucial, regardless of whether you’re setting up your first machine or upgrading from an older model. There are a few things to take into account to make sure everything goes as planned—it’snotjust a matter of throwing on some clothes and starting it.
We’ll walk you through the easy steps to take in your new LG washing machine before and during the first wash in this guide. We can help with everything from running a first cycle to acquaint yourself with the settings to making sure your machine is ready.
You can enjoy clean, fresh laundry in no time with your new LG washing machine if you follow these simple tips.
First, let"s get ready
You should check the machine to make sure it is fully operational before beginning the first wash. To comprehend the fundamentals of operating the device, the primary cleaning modes, and the available options and additions, it is crucial to thoroughly read the user manual.
Improper management of intelligence can interfere with the washing machine’s main control module’s ability to function.
Additionally, prior to the first startup, it is advised that:
- check the reliability of the fastening of the inlet and drain hoses. The drain hose must be secured with special diligence. When actively draining waste liquid from the tank, it can jump out of the hole and cause flooding;
- make sure that all transport bolts are removed. The purpose of these elements is to ensure the safety of the machine during transportation. Transport bolts must be removed before starting the washing machine. Special plugs supplied with the equipment are inserted into the resulting holes. The number of bolts must be specified in the instructions for the device. Even one bolt remaining inside can cause the machine to quickly fail;
- open the hatch door and carefully inspect the surface of the drum. Make sure that there are no foreign objects or debris there;
- check if all the adhesive tape has been removed from the body of the washing machine. Usually, it is used to fix the machine parts.
After the inspection is finished, the inlet hose valve needs to be slightly opened. This will guarantee that water can be obtained from the utilities. This is the required sequence of steps to follow before turning on the washing machine.
Activating for the first time
The makers of LG washing machines advise consumers to run a "empty" first wash—that is, to run a load of laundry without filling the drum. It is also advised to stay close to the device being tested at all times so that you can respond quickly to any malfunctions. The following will be the algorithm used to begin a "test" wash:
- plug the machine into the network;
- close the hatch door tightly until it clicks into place;
- pour washing powder or liquid detergent into the detergent drawer;
- activate the "Cotton 60°" mode using the program switch knob or buttons on the control panel;
- wait until the washing machine finishes performing the set mode;
When the machine is operating, pay attention to the noises produced by the machinery to ensure that there are no unnecessary humming or grinding sounds.
- inspect the unit after washing. Make sure that the drain and water intake hoses have 100% coped with their task, whether there are any leaks. Look under the bottom of the washing machine, make sure that there is no leak.
The LG washing machine shouldn’t "jump" around the room or vibrate a lot while it’s running. Check to see if the equipment was installed correctly and if the floor beneath the machine was level if it shook or "went wobbly" during the washing cycle. If the washing machine creaked, hummed, or made noise when it was first starting up, you should contact a service center technician and put it out of commission until the issue is fixed.
It is advised to do the first wash without clothing because the technical liquids and oils used during assembly at the factory may contaminate the "insides" of the washing machine, specifically the hose cavities and the drum’s surface. You run the danger of leaving a few stubborn stains on the fabric after washing clothes in a brand-new machine.
A test wash is intended to ensure that the washing machine is operating properly and that the hose connections are tight, not to clean the laundry.
| Step | Description |
| 1. Remove shipping bolts | Before starting the first wash, make sure to remove the shipping bolts at the back of the machine to avoid damage during operation. |
| 2. Check water supply | Ensure that the water supply hose is properly connected and the water faucet is turned on. |
| 3. Add detergent | Put a small amount of detergent in the main wash compartment of the detergent drawer. |
| 4. Select a wash cycle | Choose a short or gentle wash cycle to run the first load without clothes. This helps clean the drum and remove any residue. |
| 5. Start the machine | Press the start button to begin the first wash cycle. Let the machine run through the entire cycle without interruption. |
| 6. Wipe down the drum | After the cycle is complete, open the door and wipe down the inside |
To guarantee that your new LG washing machine operates well and lasts longer, prepare it for its first wash. This is a straightforward but crucial step. You can keep any residue from affecting your laundry by doing the suggested cleaning cycle after the initial setup.
If there are any special instructions applicable to your model, don’t forget to consult the manual. Taking good care of yourself from the beginning can prevent problems later on.
You can start washing your clothes with confidence now that your washing machine is ready because you’ve set it up for success.
For your new LG washing machine to operate at its best and last a long time, the first wash is essential. It’s crucial to run an empty cycle to get rid of any manufacturing residues before washing your clothes. This easy step guarantees that your laundry always comes out clean and fresh by maintaining the machine’s efficiency and cleanliness.
