First start of the Indesit washing machine

A new washing machine’s setup can be an exciting and occasionally overwhelming experience. You probably can’t wait to use your new Indesit washing machine if you just bought one. However, there are a few crucial steps to take for the first start-up before you can begin washing your clothes.

Your Indesit washing machine will perform better and last longer if you know how to set it up and use it correctly. Everything you need to do to get ready to hit the start button will be walked through in this guide, from taking out the transit bolts to doing the first wash cycle without laundry.

You can prevent future issues and make sure your washing machine is ready to provide the best performance from the very first wash by taking the time to install and prepare it correctly. Now let’s get going!

Let"s make sure that the machine is prepared

If you strictly follow the instructions, the first wash will go "like clockwork." Make careful to go over the user manual’s basic operating instructions for the automated machine. It is also preferable to quickly become familiar with the symbols on the dashboard, learning what each one represents and discovering the washing machine’s available modes and settings.

Following the purchase of a new washing machine, the following steps are required:

• remove the transport bolts;
• connect the machine to the utilities;
• level the washing machine;
• wipe the inner surface of the drum with a damp cloth;
• remove the factory stickers and run a test cycle.

It’s crucial to remember to remove the transport bolts holding the washing machine drum.

The washing machine drum is intended to be secured with transport bolts. Ensuring that the machine’s "insides" do not collide while being transported is crucial. It is forbidden to turn on the machine without taking out the screws. If you do, the engine will spin the stationary "centrifuge" and it will resist, which means that other parts like the shock absorbers and bearings will also suffer in addition to the container.

The correct way to remove the transport bolts is outlined in the instructions. There are also indications of their number and location on a particular Indesit model. The holes are filled with the specific plugs that come with the washing machine after the screws have been removed.

You should not rely on warranty repairs if you begin the initial wash without taking off the transport bolts. The service center will decline free service because the users’ carelessness will cause the breakdown.

Installing the washing machine is the next step. Professionals should make the connection, ideally. It’s critical to level the body, position the drain hose correctly, link the device to the communications, and tighten the pipe clamps firmly. The machine will vibrate while it is operating, and a leak could result from a shaky connection.

The washing machine’s drum needs to be cleaned with a moist cloth following installation. Additionally, the machine’s body is cleaned of dust and grime. Remove all of the manufacturer’s stickers with care. After that, the machine is dried off.

The washing machine is now prepared for its initial wash. Of course, loading items into the machine is premature. A technical start-up is done first. We’ll explain what it is and its necessity to you.

An Indesit washing machine must be started for the first time in order for it to function properly and efficiently. You can avoid potential problems and increase the longevity of your appliance by correctly configuring the machine, selecting the appropriate settings, and performing an initial test cycle. Making sure your Indesit washing machine is prepared for frequent use is easy with the help of this guide.

Washing the internal elements

You can begin the first cycle after setting up the machine and reading the user manual. The washing machine is very easy to turn on. To turn the shut-off valve and press the "Start" button, you must first insert the power cord into the socket. Let’s examine the differences between a test wash and a regular wash.

The first cycle of the washing machine, known as technical start-up, is run without any laundry in the drum. Why is a "idle" wash necessary? It facilitates:

• wash factory dirt from the elements of the washing machine;
• remove an unpleasant, technical smell;
• check whether the washing machine is working properly. (You can watch how the machine collects and drains water, how noisy it is during operation, whether there is excessive vibration, etc.).

Powder or gel is added to the first wash, which is done without any laundry in the drum.

Why is the cycle run "empty"? Grease or other technical liquids can stain laundry if you use them to start the first wash. Thus, it is preferable to "run" the washing machine empty rather than take a chance. Pouring detergent into the powder container is necessary to improve machine washing.

Should a malfunction be detected during the technical start-up process—such as a leak, a program "freezing," or a non-functioning pump—you must immediately finish the cycle and contact a service center specialist. The buyer is entitled to free warranty service for the duration of the warranty; the Indesit company will locate the issue and pay to have it fixed.

You can select any high-temperature algorithm for the idle wash mode, which must last for at least two hours. To properly clean the machine from the inside, this is required. The program chosen for subsequent operations is contingent upon the type, color, and level of contamination present in the laundry.

As a result of the numerous unique programs and functions that contemporary Indesit machines have stored in their memory, selecting the ideal cycle parameters for any kind of fabric will be simple.

The dashboard displays the names or designations of the washing modes. Although you can infer from your intuition what a given program is meant for, it is still advisable to refer to the equipment’s instructions. Each option is described in detail. The user manual explains which fabrics work best when washed using a particular algorithm, how hot the water should be, and what spin speed goes with it.

Once you have a firm grasp of the programs, you can begin cleaning. To carry out this:

• connect the machine to electricity;
• turn the shut-off valve;
• load things into the drum (it is important not to exceed the maximum permissible load weight);
• close the hatch;
• pour powder or pour in washing gel into the cuvette;
• select the desired washing mode using the programmer;
• adjust the cycle settings, if necessary;
• press the "Start" button.

The machine will then begin cleaning the items. Indesit machines play a nice melody to alert users when the cycle is about to end. Two to three minutes after the sound signal, the hatch door will open. Pulling the handle too soon puts it at risk of breaking.

The initial setup of your Indesit washing machine is a simple procedure that guarantees optimal performance and efficiency right from the beginning. Gain the most out of your new washing machine and steer clear of potential problems by closely adhering to the initial setup instructions.

To remove any residues from the drum, it’s crucial to level the machine correctly, turn on the water supply, and do a test wash cycle without laundry. By taking these precautions, you can help shield the machine from harm and get it ready for frequent use.

Your Indesit washer is prepared to handle your laundry after you’ve finished these preliminary steps. Its efficient operation will be ensured for many years to come with proper maintenance and use.

Video on the topic

Installation and first start-up of the washing machine Important Information !!!

Indesit washing machine installation connection test

First wash in a new washing machine. How to use the machine for the first time