It can be thrilling to set up a new washing machine, but it’s crucial to make sure everything is done right the first time. One of the most important steps in preparing your Haier washing machine for frequent use is the first run.
We’ll walk you through all the necessary steps to properly start your Haier washing machine in this guide. You can help prolong the life of your appliance and make sure it works at its best right from the first wash by following these easy instructions.
This post will provide you the assurance to get your washing machine up and running smoothly, regardless of whether you’re new to Haier appliances or just want to make sure you’re doing everything correctly.
| Step | Description |
| 1 | Unpack the machine and remove all packaging materials. |
| 2 | Place the machine on a level surface near water and power connections. |
| 3 | Connect the water inlet hose to the water tap. |
| 4 | Attach the drain hose to a suitable drain outlet. |
| 5 | Plug the machine into a power outlet. |
| 6 | Run an empty cycle to check for leaks and proper installation. |
Is the machine ready for work?
Examine the equipment’s instructions before turning on the machine. The washing machine’s user manual explains how to level it and connect it to the home communications system. The primary laundry programs and other features offered by the intelligence are also covered.
When you first turn on the automatic machine, remember to take out the transport screws.
Transport screws hold the machine’s drum in place. This prevents it from striking other "insides" of the washing machine when being transported. The equipment handbook details the quantity and placement of the bolts (four on some models, six on others).
Plugs are inserted into the holes left by removing the transport bolts. They are part of the machine itself. It is not permitted to start the machine without removing the transport bolts; doing so could cause the washing machine to malfunction. Since the user will be to blame for the breakdown, the device will not be able to be repaired under warranty in this case.
Prior to the initial launch, confirm that:
- all transport bolts are unscrewed from the body;
- the machine is correctly connected to utilities;
- the washing machine is level;
- there is no foam, polyethylene, tools, etc. left in the drum..
You can then begin the initial wash. A test cycle is initiated first. We’ll let you know what comes next.
Washing with an empty drum
What makes an automated machine’s test run unique? It needs to be done without using the washing machine for laundry. Obviously, the first cycle must be completed "idle."
Before being put on the market, every washing machine is inspected at the factory. Additionally, the parts become soiled in fuel, oil, and other technical liquids during the assembly process. The automated machine still contains all of this dust and debris.
The cycle is completed without any laundry since the first wash is intended to clean the machine from the inside out.
Do not put your items into the machine right away when it is first started to avoid destroying them. If not, stains might still be present on your clothing. The empty cycle will assist in cleaning the washing machine’s interior and getting rid of the disagreeable technical odor.
The following will be the sequence of events when the test cycle begins:
- close the hatch door (after making sure that there is nothing in the "centrifuge");
- pour or pour in the dispenser the detergent for washing (this can be any concentrate suitable for the automatic machine);
- connect the washing machine to the electrical network (you cannot take an extension cord, the power cord must be connected directly to the outlet);
- select any high-temperature washing mode with a duration of 2 hours or more using the programmer;
- press the "Start" button.
You then need to observe the machine’s initial washing cycle. As a result, stay close to the device. Observe how the device:
- fills the tank with water;
- spins the drum (during washing, the movement should be slow, during spinning – more intense);
- brings the water to a specified degree (usually heating takes 5-7 minutes);
- pumps water out of the system and discharges it into the sewer.
Make sure there are no leaks as well. Examine the machine’s body and the locations where the inlet and drain hoses connect. Check the device’s vibrating level while it’s in use. The washing machine is probably installed incorrectly if it literally "jumps" around the room.
De-energize the washing machine and pause the program if you discover any equipment issues. Next, give the service center a call. If a manufacturing defect is the reason for the malfunction, the machine will be fixed at no cost to you. When you connect and install the washing machine on your own rather than having it done by a professional, some companies won’t repair your warranty.
It’s not a good idea to attempt fixing a new machine yourself. Clearly, the warranty is null and void in this instance. Using a defective device is also forbidden since it poses a risk. The automatic machine is prepared for use if it has calmly finished the test cycle. You can start the wash by tossing the laundry into the drum.
Your Haier washing machine’s initial start-up is essential to ensuring its long-term durability and optimal performance. You can start washing with confidence after reading this guide, which will take you through the easy steps to get your machine up and running, from setting it up to running its first cycle.
Powder for the initial start-up
It is important to mention separately the kind of product that is recommended for the Haier automatic machine’s test run. Pouring ordinary powder or gel that is labeled "Automatic" into the cuvette is acceptable. Granules should not be used for hand washing as they will produce too much foam.
You can buy a specific product for the washing machine’s first cycle if you’d like. Take Start HLR0054, for instance. This mixture eliminates offensive odors and combats all industrial pollutants.
Surfactants found in Helfer make it simple to deal with grease, oils, fuel oil, and other technical fluids. The machine’s internal components are cleaned and degreased by active ingredients. Any automatic machine can use this product.
Helfer Start HLR0054 is used in the following standard manner:
- pour the product into the dispenser (into the main wash compartment);
- select a program for a test wash;
- activate the cycle.
The machine can be used for its intended purpose following the test "run." To ensure that all of the detergent is completely removed from the washing machine, it is permitted to initiate another idle cycle by choosing the "Rinse + Spin" option.
When you first turn on your Haier washing machine, it’s a simple process that makes sure your machine is ready to work at its peak efficiency. You can prolong the life of your computer and help to avert potential problems by closely adhering to the setup instructions.
Don’t forget to familiarize yourself with the various programs, run a test cycle without laundry, and double-check the connections. You’ll feel more confident operating your new washing machine when you follow these easy steps.
Now that everything is configured correctly, you can take advantage of your Haier washing machine’s efficiency and convenience while knowing that it will be able to meet your laundry needs for many years to come.
