First start of the DEXP washing machine

It can be a little confusing to first get your new DEXP washing machine up and running. But don’t worry, it’s simple once you know the steps. You won’t have any trouble starting to enjoy clean clothes thanks to this guide, which will walk you through the initial setup.

It’s crucial to set up your machine correctly before you begin washing. In order to do this, take out all packing materials, inspect the connections, and make sure everything is safe. Spend some time going through the handbook; it’s a great source of model-specific instructions.

After the machine is configured, you must perform a first-time cycle. This is an important step because it makes sure everything is operating properly and helps remove any manufacturing residues. It’s a simple procedure that typically entails running an empty wash using either water alone or a specific cleaning solution.

Your DEXP washing machine will be prepared for its first load of laundry once these preliminary steps are finished. Now that everything is set up, you can easily enjoy the convenience of wearing clean clothes. You’ll quickly achieve effective and efficient washing if you adhere to these tips.

The initial setup of a DEXP washing machine is a simple procedure that can guarantee longevity and peak performance. It’s imperative to correctly set up the machine by following the manufacturer’s instructions, inspecting connections, and performing an initial test cycle in order to get things going. This helps you become acquainted with the features of the machine and guarantees that everything is operating as it should before you begin your regular laundry routines.

Initial actions with the DEXP machine

Any brand of new washing machine needs a set of setup steps that are outlined in detail in the user manual. This implies that you should carefully read the instructions after making a purchase. This will assist in learning all of the functions of household appliances as well as all of the control panel symbols. You can move on to other preparations after reading.

• Install the washing machine using a building level so that it stands as level as possible.
• Prepare all communications, if you have not done so earlier.
• Remove the transport bolts from the back wall of the case.
• Clean the drum from foreign objects.
• Remove unnecessary factory stickers.

Since many of the points directly affect the device’s performance, each one needs to be thoroughly examined. The device should only be installed by experts as this will prevent common installation mistakes. All you have to do is fix the clamps on all the hoses and adjust the CM’s position, so you can handle this process on your own. If this isn’t done, the unit will vibrate more during spinning, bouncing around the room, and weak hose fasteners will cause leaks.

Next, it is imperative to remove all transport bolts installed to secure the washing tank in a stationary position. If they were not in the design, then during transportation the tank could become loose and either deform itself or damage other internal components of the equipment. In this case, after transportation, the bolts must be removed, because if the first wash takes place with them, the electric motor will unsuccessfully try to spin the stationary drum, as a result of which the tank itself, shaft, bearings, shock absorbers, engine and other key components may be damaged. That is why it is so important to remove the clamps in a timely manner, first loosening them with a key, then pushing them inward, and then closing them with special plastic plugs that come with the equipment. You can find out the exact number and location of the bolts in the same instructions for the machine.

Do not rush to start the first wash until you have removed all of the fasteners, as using a DEXP washing machine with transport bolts will void the warranty.

Cleaning the device of foreign stickers, tape, foam, and other debris is the final step. Remember to carefully inspect the drum as well, as this is where the manufacturer typically stores hoses, instructions, plastic plugs, and other parts. Furthermore, use a dry cloth to wipe the surfaces. This will finish the preparation, so you can move on to the work cycle for testing.

Washing the machine

A new washing machine also requires a technical start-up to remove any dust and debris that might have accumulated during factory assembly and warehouse storage. This is very simple to do because there are no differences between this cycle and a standard wash, other than the fact that there is no need to add laundry to the drum. To increase cleaning efficacy, just connect the apparatus to the water supply and power grid, turn it on, and add common household chemicals. The only thing left to do is begin the working cycle and wait for it to finish.

If you do not want to contaminate anything with technical lubricant, never add clothes to the drum.

An empty wash is required to examine the machine’s functionality and the caliber of the installation, in addition to cleaning the machine’s internal parts. You can learn a lot about the washing machine during this initial wash, including how well it collects and drains water, whether there is excessive vibration or unnecessary noise, whether there are any leaks, and more. Keep an eye on every phase of the cycle so that you can start troubleshooting as soon as needed.

After the test, you can safely move on to a thorough first wash if no leaks, malfunctions, spinning issues, or other issues are found. If not, you must immediately halt the operation and contact the repair service. In this instance, it is best to move forward without hesitation, especially since free warranty service is typically provided after the purchase.

Test program and how to start it

Any program may be used for the test work cycle, but only under the strict requirements of a high temperature and length. You should choose the washing mode in the future based on the kind of fabric, the kind of clothes, and the level of contamination. Due to the numerous modes that contemporary DEXP washing machines offer that are appropriate for every situation, choosing a function is incredibly simple.

Most of them have obvious purposes just by looking at their names, so you can determine what they’re used for even without a hint. For users who have previously owned an automatic washing machine, it will be even simpler. Nonetheless, it is still preferable to follow the instructions, which explain how to decode each icon on the CM control panel, rather than acting based only on instinct. All of the programs, their duration, spin strength, water heating, and much more are covered in the official reference book. You can begin cleaning after you’ve chosen the proper mode.

• Connect the machine to the power supply.
• Turn on the water supply tap.
• Place the clothes in the drum, sorting them by color, type and dirtiness.

Keep in mind the minimum and maximum drum load to avoid imbalance in the system.

• Close the hatch door until it clicks.
• Add household detergent to the powder receptacle.
• Select the desired function with the programmer.
• If necessary, additionally set the cycle with the appropriate buttons.
• Press the "Start" button.

After the manipulations are finished, all that’s left to do is wait for the task to be completed, which most contemporary "home assistants" indicate with a distinctive sound signal. You should wait a few minutes after receiving this message because the hatch will be locked at that point for security.

If you follow these easy steps, setting up your DEXP washing machine for the first time is not that difficult. First things first, confirm that the machine is installed correctly and that the water supply is connected to it. To avoid any problems while the machine is operating, make sure the hoses are tight and level.

It’s imperative to run a test after everything has been configured. Choose a simple cycle and use an empty load. This will guarantee that everything is operating as it should and help remove any residue left over from the manufacturing process. During this initial run, it’s a good idea to look for any leaks or strange noises.

You are now prepared to use your washing machine for actual loads after your test run. To get the most out of your machine, be sure to read the user manual for detailed instructions and suggestions. You can prolong the life of your DEXP washing machine by providing it with regular maintenance and appropriate usage.

Video on the topic

First start and washing on dexp

First-time start-up solution for a washing machine

Washing machine | Installation and first start-up

DEXP-WM712 washing machine first review.

Installation and first start-up of the washing machine