First start of the Beko washing machine

The first time you start up your new Beko washing machine, it can be a little intimidating, but once you know what to do, it’s a simple process. You can make sure your machine is correctly configured and prepared to handle your laundry needs by following this guide, which will take you through each step.

Make sure to take out any transit bolts and packing materials that may be inside or surrounding the washing machine before starting. Usually placed to safeguard the device during transportation, these must be taken out to avoid any harm or malfunction.

The next important step is to make sure your washing machine is level and connected to a water supply. Use a spirit level to level the machine and adjust the feet if necessary. An uneven machine can cause excessive vibrations and noise. After everything is set up, you should perform a brief empty cycle to remove any last traces of manufacturing residue and look for any leaks.

Finally, for model-specific instructions, consult the handbook that came with your Beko washing machine. This will walk you through any extra setup procedures or features that may be specific to your computer. You can make sure your washing machine is prepared for its most important task—keeping your clothes clean and fresh—by following these steps!

Make sure the unit is ready

Make sure the washing machine is operational and familiarize yourself with its basic controls before using it. To begin with, read the user manual and learn how to use all the buttons and icons on the machine’s dashboard. Next, make sure it’s ready for the next wash, focusing on four key areas.

• Are the fasteners reliable? Ideally, a professional should install a new washing machine. Loosely tightened clamps on the inlet and drain hoses "fly off" during the first wash and lead to leaks.
• Have the transport bolts been removed?? The drum clamp is necessary for safe transportation, which ensures the safety of the shock-absorbing system. However, it is prohibited to operate the washing machine with the tank fixed – the equipment will not be able to "accelerate", which will lead to severe internal damage to the machine. All screws holding the drum tank must be removed and replaced with plastic plugs included in the kit. How many fasteners are there in a specific Beko model can be easily found in the instructions.

Unremoved transport bolt damage is not covered by free warranty service!

• Is the drum clean? Often, components are placed inside the washing machine, which must be removed before starting the machine.
• Have all the store "protection" been removed? For safety reasons during transportation, the equipment is covered with adhesive tape, fixed with plastic ties and covered with foam. Before using the machine, all foreign objects are removed.

You can turn on the machine for the first time if "yes" answers all of the questions. The initial cycle, known as a technical start-up, is not regarded as a complete wash, though. We shall elaborate on how and why it is done.

Technical start-up

You can turn on the equipment after making sure the machine is ready and reading the instructions. Simply insert the power cord into the outlet, open the water pipe’s valve, fill the drum with laundry, and press the start button to begin washing. However, it is preferable to follow a technical cycle rather than moving quickly.

An "empty" wash, or a cycle with an empty drum, is considered a technical start-up. This will assist with two tasks simultaneously:

• factory grease will be washed off the internal surfaces of the machine, due to which the unpleasant smell will disappear;
• you can safely check the serviceability of the machine (water intake, drain operation, noise level, presence of increased vibration, etc.d.).

When Beko first launches, detergent is used instead of laundry!

Laundry is not added during the test wash because there is a significant chance that something will go wrong with grease left in the drum or that a manufacturing defect will prevent the clothes from being fully washed. It is preferable to test the machine empty rather than take a chance. Detergent, on the other hand, must be added in order to rid the appliance of odor and dirt.

A service center expert is dispatched to the home and the cycle is forcefully stopped if a leak, program failure, or other system malfunctions are found during the first start. Keep in mind that under warranty, the majority of manufacturers—including Beko—offer complimentary yearly maintenance.

There are a few simple steps you should take the first time you set up your new Beko washing machine to make sure everything goes as planned. Making the required connections, installing the machine correctly, and performing a test cycle to look for any problems are all part of this initial start-up procedure. You can prepare for productive and trouble-free laundry days ahead of time by carefully following the manufacturer’s instructions and spending some time getting to know the features of the machine.

User settings

Regardless of the kind and color of the laundry, any program can be used to complete the first empty wash. But if you use the washing machine again, you have to select a mode that protects items from overheating and spinning. This is difficult to accomplish because contemporary Beko have an amazing dashboard with twelve buttons, lights, and symbols.

It can be challenging for first-time washer users to comprehend all of the buttons, symbols, and sensors. Attempting to decipher the symbols by trial and error won’t work; instead, you must read the instructions carefully and open them. All of the programs that are available must be listed in the manual.

You must consider the type and color of your laundry when selecting a washing program!

In summary, this is how the washing machine starts up:

• connect the equipment to the power supply;
• turn the valve on the water pipe to the open position;
• sort the laundry and load it into the drum (do not forget about the capacity of the drum – it is prohibited to exceed the maximum and underestimate the minimum load weight);
• close the hatch tightly;
• add detergent (how and how much, we will discuss below);
• select the appropriate mode with the programmer, and if necessary, vary the washing parameters (spin speed, water temperature, cycle duration);
• press "Start" and wait for the end of the program.

Every mode has a unique duration, spin speed, and temperature range. The majority of contemporary Beko units alert users to the cycle’s end with a beep. Don’t rush to open the hatch, though, as the system will hold the electronic lock in place for two to three minutes after the wash is finished.

Adding the product

You need a detergent for a thorough and superior wash. On the left side of the Beko body is a unique compartment that serves as a powder receptacle for filling or pouring. Simply grab the ledge handle, pull it in your direction, and pull out the dispenser to use it.

It’s important to keep a few things in mind in order to simplify the task:

• buy only high-quality and safe products suitable for the type of laundry being washed;
• pay attention to the type of powder and gel (there are compositions for automatic, hand washing and semi-automatic machines);
• use a measuring cup for the correct dosage;
• distribute the powder correctly (each dispenser has three sections, of which the left one is for the main program, the central one is for liquid products, stain removers and conditioners, and the right one is when using the pre-wash mode).

Pay attention to the dosage when adding the detergent!

Washing wipes and helium capsules are two more alternatives available on the market today. These items function more deliberately because they are put right into the drum. The enhanced effect does, however, come at a cost, as they are several times more expensive than a regular powder or gel.

Although it may seem a little intimidating at first, starting up your Beko washing machine is a simple procedure. First, confirm that the machine is installed correctly and that all of the hoses are securely connected. Verify again that the drainage and water supply are installed properly to prevent leaks or other issues.

Next, it’s a good idea to run a quick empty cycle before you run your first load. This aids in removing any dust or residue that may have gathered during production or transportation. If your machine has an empty or "drum clean" program, just choose it. Alternatively, you can run a quick wash cycle without adding any laundry.

Lastly, for model-specific instructions, refer to the user manual. This will help you choose the features and settings that are best for your laundry requirements. You can make sure your Beko washing machine is properly configured and prepared to operate at peak efficiency by following these instructions.

Video on the topic

Beko SteamCure MVSPE6H9616W – a modern washing machine for every day

First start of the Beko washing machine

How to turn on the Beko washing machine and start washing?

How to properly install a Beko washing machine?

How to enable the delayed start/start at the right time/overnight function in a Beko washing machine?

Review. Beko MVE 69512 ZAW washing machine.

Beko 7 kg washing machine with steam review beko VSDN73612 from DNS