Electrolux washing machine does not fill with water

It can be very annoying to deal with a washing machine that refuses to fill with water. You’re not the only one having problems with your Electrolux washer not taking in any water. Numerous problems, from straightforward glitches to more intricate mechanical failures, may be the cause of this issue.

Let’s review the fundamentals first. Make sure the hoses are connected correctly and that the water supply is turned on. Occasionally, the problem could be as straightforward as a closed valve or a loose connection. Examining the water inlet filters is also important because they can clog and stop the flow of water.

If everything appears to be in order but the issue still exists, there may be a problem with one or more internal washer components. This could be related to the electronic controls or even the water inlet valve. Your machine won’t fill up as it should if these parts fail because they are essential for controlling the water flow.

We’ll take you through some standard troubleshooting procedures in this guide to help you locate and, hopefully, resolve the problem with your Electrolux washing machine. Whether it’s an easy fix or an indication of a more significant issue, we’ll offer advice on how to get your washer operating again.

Possible malfunctions

First, it’s important to determine whether or not any water "enters" the system at all. To accomplish this, take out the cuvette; if the powder is moist, a supply exists. The apparatus does not fill at all when the granules are dry.

Try running the tap; it’s possible that someone has turned off the cold water supply in your home. If this isn’t the case, you’ll need to investigate the washing machine itself to see what’s going wrong. The issue may be concealed in several locations.

1. In a non-working inlet valve. It is this that you should pay attention to if you find dry powder in the cuvette. Checking the part requires certain skills: you will have to apply 220 volts to the water intake valve. If the element “clicks”, then it is working properly. If there is no reaction to the received effect, it will need to be replaced.
2. In a clogged filter. At the entrance to the machine, in front of the electromagnetic valve, there is a special "mesh" whose purpose is to filter the liquid and prevent debris from entering the system. When it is "clogged", water cannot seep inside. In this case, the machine "buzzes" unusually, trying to fill the tank.
3. A faulty level sensor. Sometimes, the pressure switch, when the tank is empty, signals the "brain" that there is enough water in the system. The control module turns off the inlet valve, and liquid does not enter. To check the element, you need to remove the top cover of the housing. Having found the sensor (it looks like a washer), you should unhook the tube from it and blow into it. A working pressure switch will click. Sometimes such a blow helps to repair the part if the hose is clogged with dust or other debris.
4. In a damaged control module. Very rarely, the reason that the machine does not fill with water is a broken board, but you should not completely exclude the possibility of this defect. In case of a malfunction of this kind, it is better to invite a technician who has experience working with electronics. A specialist will determine whether it is advisable to repair the microprocessor, or it is better to purchase a new unit.
5. Burned out pump. If at the very beginning of operation the pump does not give a signal that it is ready to drain the water, the control module will not start washing. Usually it is not advisable to repair the element, it is better to install a new pump instead of the failed one.

These days, washing machines come with a self-diagnostic feature. When you enter the service mode, the device will show an error code that will help you narrow down the list of potential problems. Based on statistical data, clogged filters and pipes or damaged valves frequently prevent the Electrolux washing machine from accurately collecting water. In rare instances, a burned-out pump or a damaged microprocessor are to blame.

Verify that the hatch is closed tightly; if it is not, the intelligence will not begin to collect water in the tank.

Examining the tube that extends from the pressure switch is also a good idea. The Electrolux washing machine can become unusable due to even tiny surface cracks. Let’s determine which safety precautions to take and where to begin our inspection.

Mandatory initial actions

If the Electrolux washing machine’s warranty hasn’t expired, it’s best to contact the service center rather than attempt "home" repairs. Experts will take the machine for diagnostic testing and carry out the required repairs.

If the warranty has past its expiration date, you can attempt to solve the issue on your own without contacting a technician. Diagnostic procedures range from basic to sophisticated. Initially, confirm that the pipes are receiving water flow. It’s possible that the water supply is off. You’ll need to examine the washing machine if all communications are operational.

Make sure to de-energize the apparatus and turn off the water supply tap before beginning diagnostics.

Recall the machine’s behavior from the last time it was turned on. You should inspect the inlet hose if you could hear a distinct "buzzing" sound when it attempted to draw water. Check for cracks in the tube; it might be bent.

Proceed to the inlet filter if everything is in working order. Over time, the mesh gets clogged with debris, making it impossible for even a single drop of liquid to pass through. You must take the following action:

• unhook the inlet hose from the back wall of the housing;
• inspect the “inside” of the inlet valve, find the mesh;
• grasp the filter with pliers;
• forcefully pull the mesh out of the valve;
• clean the perforation using a toothpick or needle, then rinse the filter in warm water;
• put the filter element back.

You should also inspect any deep cleaning filters that may be placed in front of the machine’s inlet hose. It can be found right after the shut-off valve. The element sustains damage from scale in addition to debris buildup.

Two wrenches are required to disassemble the deep cleaning filter. One should "support" the joint with the first, and the other should remove the fastening nut. Prior to the pipe, a deep basin is set up, and water is forced into it at high pressure. The element will be kept cleaner by the jet. The last step is to "plant" the nut back and make sure the connection is leak-free.

It can be quite annoying if your Electrolux washing machine isn’t filling with water, but don’t worry—there are frequently easy fixes to get it back in working order. Make sure the hoses are correctly connected and that the water supply is turned on first. A kinked hose or an inadvertently closed shut-off valve can occasionally be the cause.

Examine the inlet filters next. Over time, these may accumulate debris and clog, preventing the flow of water. The problem might be solved by cleaning these filters. Furthermore, make sure there is enough water pressure; low pressure can impede proper filling of your machine.

There might be a more complicated issue at hand if these simple checks are ineffective in solving the issue. Then, it might be time to speak with a reputable repair service. Future problems can be avoided by performing routine maintenance and taking care of minor concerns as soon as they arise.

Recall that diagnosing and fixing a washing machine doesn’t have to be difficult. You can frequently identify and resolve the issue on your own, maintaining the efficiency of your laundry routine, with a little perseverance and attention to detail.

It can be annoying if your Electrolux washing machine isn’t filling with water, but there are a few typical problems that could be the reason. Knowing these possible issues can help you troubleshoot and quickly restore your washer to working order, from easy fixes like checking the water supply or hose connections to more involved solutions like cleaning filters or inspecting the water inlet valve. You can once again have easy and productive laundry days by following the steps outlined in this article to identify and fix the problem.

Video on the topic

ELEKTROLUX washing machine does not fill with water

How to solve the problem with an Electrolux dishwasher that does not fill with water? 🤔

Service test of Electrolux washing machines Error reset

Electrolux washing machine error E10. Washing machine does not fill with water