Consumption of washing powder per 1 kg of laundry in an automatic washing machine

The importance of using the right amount of detergent is something that is easy to forget when using a washing machine. Not only is it important to use flame powder in the proper dosage for clean clothes, but it’s also important for the environment and your machine’s health. A lot of people just wing it or go by the generic advice on the label, which can result in either an under or overdose.

The weight of your laundry, the hardness of the water, and the degree of soiling all affect how much flame powder is required. It’s not always necessary to use more powder for better results; in fact, using too much can eventually break down your washing machine and leave residue on your clothes.

This post will examine the approximate amount of flame powder needed to wash one kilogram of laundry in an automatic washing machine. Knowing this will enable you to use detergent more effectively and economically while still getting better results.

How much detergent is needed?

A large amount of powder will leave soap stains on the fabric and undissolved granules inside the machine if it is poured into the tray. Furthermore, items won’t be cleaned; stains will remain on the fabric. You must compare the weight of the loaded laundry, the degree of contamination, the cycle’s temperature and length, and the water’s hardness when determining the cleaning agent dosage.

Calculating the ideal dosage might seem challenging at first. After you’ve become accustomed to it, this process won’t be too difficult. Now let’s calculate the amount of powder required for each type of washing.

• Pre-wash. Lingerie "spins" in the drum for about 15 minutes, the temperature usually does not exceed 25 ° C. Powder consumption will greatly depend on the quality of tap water. If it is soft, it is 10 grams per 1 kg of items, medium and hard 15 and 20 grams respectively.
• Main automatic cycle. Here, the processing time of the laundry will vary depending on the selected mode. So, at a washing temperature of 40 ° C, it is enough to pour 15, 20 or 25 grams of dry granules per 1 kg of clothes, respectively, for soft, medium and hard water.
• Hand wash. With this type of cleaning, a higher consumption of detergent is noted. If the water is soft, 20 grams of powder per 1 kg of laundry will be enough. When the liquid is of medium hardness – 25 grams. When tap water is too hard – 30 grams.

When washing things without stains that don’t go away, you should concentrate on the average amount of powder used.

You will need to add more detergent to the tray if the laundry has stains that are difficult to remove. Moreover, more processing of contaminated areas using more potent compounds might be necessary.

The amount of Flame powder needed in a washing machine for every kilogram of laundry is mostly determined by the type of fabric, dirt level, and water hardness. For normal loads, 20–25 grams per kilogram is advised; however, for highly soiled or delicate fabrics, the amount should be adjusted for better washing outcomes. While underdosing could result in dirty clothes, overdosing could cause residue to accumulate. Achieving the ideal balance allows for effective cleaning without wasting detergent or harming fabrics or the machine.

The presence of impurities in water and ingrained stains

Read the information on the packaging to determine the appropriate amount of granules to add to the tray. The manufacturer specifies the ideal dosage for various washing parameters. For instance, the following is the suggested intake for the majority of mass-market powders (Tide, Dosya, Persil, Mif, Ariel, Sorti, Ushaty Nyan):

• if the laundry is not heavily soiled – 150-200 grams per cycle;
• with intense soiling of things – 225-250 grams of granules.

Manufacturers of detergents recommend increasing the "norm" by 20 grams of powder when the water is extremely hard.

You need to take into account the information on the packaging, but still you should not unconditionally follow it. It is clear that the manufacturer deliberately overstates the norm – this way the product will run out faster, which means the person will go to the supermarket again for a new pack. During various experiments, it was found that when washing, it is enough to pour 25 grams of powder per 1 kg of laundry. So, if 5 kg of things are loaded into an automatic machine, it is enough to put 125 grams of powder in the tray. As you can see, this is less than the "norm" recommended by manufacturers of household chemicals.

Before putting the clothes in the machine, it is advisable to treat them with a special agent if there are persistent stains on them. Increasing the "dose" of powder won’t help; the item must be cleaned of these stains before being put in the washing machine. You can use a stain remover on a different area of the fabric and give it a hand wash. It is best to add two tablespoons of soda to the tray in order to reduce the amount of powder that the machine "eats" per wash. It will make the water softer so that the granules dissolve more easily. Sodium bicarbonate is not to be used for cleaning wool and silk items.

New technology reduces powder consumption

More effective linen cleaning can be achieved with less "consumption" of powder thanks to modern automatic machines. This method conserves water, detergent, and kilowatts. We’re talking about steam treatment of fabrics or washing machines equipped with Eco Bubble technology.

With Eco Bubble machines, the machine’s bubbles cause the detergent to "disintegrate" in water instantaneously. There isn’t a single granule left that wouldn’t dissolve because of this principle. Persistent stains are swiftly removed from fabric fibers by the foamed powder.

Additionally, steam treatment technology effectively removes stains while using fewer washing granules. The product dissolves completely in water with the aid of steam. It is not necessary to use an expensive stain remover or to pre-wash the item in this case. Here are a few contemporary automatic devices that perform the aforementioned tasks:

• Samsung WF1802XEC – "frontal" for 8 kg of laundry. Due to bubble wash technology, less consumption of detergents is achieved. Another advantage is the ceramic heating element. This coating protects the heating element from scale.
• LG F12U2HCS2. This model has steam processing technology. Maximum loading weight is 7 kg. There is an auto-weighing function.
• Daewoo DWD-UD2413K is another full-size frontal machine for 10 kg of things with bubble wash technology.

It is best to focus on models with an automatic laundry weighing sensor, steam, or Eco Bubble feature when selecting a new machine. With such equipment, you can make savings. Powder consumption will be decreased, along with that of water and electricity.

Maintaining and cleaning your washing machine effectively depend on using the proper amount of detergent. Generally speaking, 6–10 grams of flame powder per kilogram of laundry is recommended, depending on how filthy the clothing is. You can achieve the best results without wasting detergent or running the risk of residue buildup by adjusting this amount.

Remember that the amount of powder you require depends on the hardness of your water. Harder water might require a little bit more detergent to have the same cleaning power as softer water. For best results, consider these aspects.

In conclusion, reducing the amount of detergent you use will help your clothes look cleaner and last longer in your washing machine. Adopting the basic yet crucial habit of following the suggested dosage according to the weight and degree of dirt in your laundry is crucial.

Video on the topic

Results of washing powder tests

A spoonful of powder per 6 kg of laundry.

How much powder to pour into the washing machine

Where and how much powder to put in the LG washing machine?

TOP-5 powders for washing in an automatic washing machine