If you have a Haier washing machine, you are aware of how dependable and efficient it is for doing laundry. But to keep it functioning properly, it needs a little TLC, just like any other appliance. Cleaning the filter is one crucial chore you should never skip. It may be little, but it’s crucial to keeping your machine operating at peak efficiency.
Lint, hair, and other tiny particles can clog the filter over time, making your washer work harder and possibly less efficiently. It may be time to check the filter if you’ve noticed that your washing machine isn’t draining properly or is making strange noises. Regular cleaning can help your appliance last longer by preventing these problems.
Fortunately, maintaining a Haier washing machine’s filter is a simple procedure. You don’t require any specialized equipment or knowledge. With a little time and a few simple steps, you can get your washer operating again. To make the process as simple as possible, we’ll take you step-by-step through it in the sections that follow. Let’s explore how you can provide the proper maintenance for your Haier washing machine.
| Step | Instructions |
| 1. Turn off and unplug | Make sure the washing machine is turned off and unplugged from the power source. |
| 2. Locate the filter | Find the filter; it"s usually at the bottom front of the machine behind a small panel. |
| 3. Open the panel | Gently open the panel by pulling or prying it open, depending on your model. |
| 4. Drain water | Place a towel or shallow container under the filter area to catch any water that may spill out as you unscrew the filter. |
| 5. Remove the filter | Unscrew or pull out the filter carefully. Some water may still be in the filter, so be prepared for it. |
| 6. Clean the filter | Rinse the filter under running water to remove lint, debris, or any residue. Use a brush if necessary. |
| 7. Reinstall the filter | Put the clean filter back into its place and screw it in securely. |
| 8. Close the panel | Put the panel back on and press it until it clicks into place. |
| 9. Plug in and test | Plug the washing machine back in, turn it on, and run a short cycle to make sure everything is working properly. |
Finding a filter unit
One person out of twenty does not even know what a garbage filter is, what it is used for, or where it is located in a washing machine, according to a social survey done by Haier managers. Naturally, they are unaware that this element needs to be cleaned.
The Haier washing machine’s trash filter is situated at the bottom, behind a separate opening door, in the machine’s right corner.
Examining the bottom portion of the front wall, it is simple to spot a tiny technical hatch; the trash can is "hidden" behind it. You must pry the lid open by pulling it in your direction with a thin screwdriver or your finger.
There is a round black trash filter "plug" and a separate hose for emergency water system draining right behind the door. If the automatic machine breaks down, for example, and you need to quickly remove liquid from the tank, you can pull out the plug covering the tube. Taking out the "trash can" to clean is simple. You unscrew the drain filter from the machine; the visible portion has a handy ledge you can grab.
A straightforward but essential maintenance task that keeps your Haier washing machine operating smoothly and effectively is cleaning the filter. By routinely cleaning the filter, you can avoid clogs, which can cause your washer to perform poorly and even break. Lint, debris, and other residues can be removed from your washing machine with ease by following these simple steps. This will keep your machine operating at peak efficiency for longer, and save money on repairs.
Be prepared for surprises
The filter plug cannot be unscrewed right away. It is worthwhile to get ready for the procedure because there is always water left in the drain system. If not, the liquid that is leaking out of the hole may damage the carpet, rip it up, etc. The following will be the order of events:
- de-energize the washing equipment by pulling the power cord out of the socket;
- turn off the water supply tap;
- put aside the rugs if they are lying near the automatic machine. The water remaining in the system is dirty, if it wets the items, they will have to be washed;
- prepare a container for collecting water. A regular frying pan or a low basin will do;
- if the room has a floor covering that is afraid of moisture, cover the area around the washing machine with polyethylene, and on top – with old rags;
- tilt the machine back a little and place a basin under the body, in the area of the garbage filter;
- throw a couple of dry napkins near the basin to quickly wipe up the water if necessary.
The filter element can now be cleaned. You run the risk of flooding the area surrounding the washing machine with water if you skip the necessary precautions. Now let’s work out the next step: cleaning the drainage system component.
Let"s start removing debris from the system
To clean it now, you have to take out the "trash can." The filter element is very easy to unscrew. Grasp the "plug" protrusion and rotate the handle from right to left by half a turn. Next, watch until the container fills with the majority of the water. The trash filter will then need to be pulled; you will hold it. Use dry rags to wipe the floor if water spills around the basin after the plug has been removed. The filter might not always unscrew immediately. After applying WD-40 aerosol to the plug, you can wait 15 to 20 minutes before attempting to move it once more.
You can now get to work cleaning. Examine the element and make sure it is clear of any hair, filth, threads, or other debris. Next, give the area a warm water rinse. The plastic can deform if it is exposed to high temperatures, so you cannot treat it that way.
If the limescale becomes lodged in the filter, a more comprehensive cleaning will be necessary. After dissolving 50 grams of the product in a small basin using a packet of citric acid, submerge the "garbage can" in the solution. The scale will come off the part after you have to wait six to seven hours. Avoid using common household chemicals to remove deposits as they may "corrode" the plastic, leading to damage to the filter element.
You should clean the hole where the drain filter is inserted while it is "soaking." A flashlight must be shone into the interior, all trash that has accumulated from the machine’s operation must be removed from the "nest," and the walls must be cleaned of dirt using a damp cloth. Examine the impeller of the drain pump by peering into the opening where the "garbage can" once stood. Hair and fuzz frequently coil around its blades. Using a long, thin stick, remove the trash from the part’s "wings." This completes the drainage system’s component cleaning.
You can now retrieve the water basin from underneath the body, replace the cleaned drain filter, and gather all of the rags. In order to ensure that the system is sealed, use the washing machine in a brief mode, such as "Rinse." Verify that the "trash" area is leak-free while the equipment is operating.
Maintaining the proper operation of your Haier washing machine requires performing a straightforward but essential task: cleaning the filter. Frequent filter maintenance can prolong the life of your machine, reduce clogs, and increase washing efficiency. It is a simple procedure that can prevent future headaches.
Make sure the washing machine is unplugged and turned off before beginning. Find the filter, which is typically located near the machine’s front bottom. Carefully remove the filter by opening the cover. Rinse it under warm water to get rid of any accumulated lint or debris. Additionally, it’s a good idea to look for any remaining debris that may have dropped into the compartment by looking in the filter area.
Replace the filter in its slot after cleaning, then firmly shut the cover. To check that everything is operating as it should, plug the washing machine back in and run a quick cycle without any laundry. It is best to clean the filter once a month to ensure peak performance and avoid unplanned malfunctions.
Cleaning the filter for a few minutes can have a significant impact on your washing machine’s efficiency. This little maintenance work pays off by keeping your appliance in excellent condition and making sure your laundry days go without a hitch.
