Cleaning the Electrolux washing machine

Maintaining the cleanliness of your Electrolux washing machine is crucial to its longevity and functionality. Detergent residue, lint, and grime can accumulate over time and impact the machine’s performance as well as the freshness of your laundry. Frequent cleaning keeps your clothes smelling and looking their best while also preventing offensive odors.

You don’t have to face an overwhelming task when cleaning your Electrolux washing machine. You can maintain optimal condition for your washer by following a few easy steps. It all comes down to keeping the major areas like the drum, door seal, and detergent drawer clean. These are the places where dirt and grime tend to collect.

We’ll walk you through simple ways to clean every part of your washing machine in this guide. You can make sure your Electrolux washer functions properly and keeps producing top-notch laundry every time you do a load by paying attention to these pointers.

Maintaining the cleanliness of your Electrolux washing machine is essential to its longevity and functionality. Frequent maintenance keeps your machine operating smoothly and helps avoid unpleasant odors. Examples of this maintenance include cleaning the detergent drawer, drum, and filter. Your Electrolux washing machine can be kept in optimal condition and continue to produce clean, fresh laundry on a regular basis by using the appropriate products and adhering to basic cleaning procedures.

A thorough wash is needed

Regular cleaning and thorough cleaning are advised for the washing machine. Consistency and complexity are important; treating individual parts or elements on a periodic basis won’t produce a noticeable effect. Ideally, following each machine use, the following steps must be taken:

• wipe the drum from soap deposits and remaining moisture;
• wash the detergent tray;
• clean the cuff from stuck dirt and water;
• "go" with a dry cloth over the body of the washing machine.

Periodically, more "deep" manipulations should be done in addition to ongoing "superficial" measures. Therefore, it is recommended to unscrew and clean the garbage filter approximately every three months. Every six months, give the washing machine’s interior a thorough cleaning.

Electrolux needs to perform a thorough cleaning with a specific agent on the dust filter once every six months, in addition to cleaning it every three months.

In order to thoroughly clean the washing machine of dirt, a special agent must be used to start the "idle" cycle. You can use inexpensive folk recipes or purchase a professional store concentrate. In the first instance, be mindful of common household chemicals labeled "express scale cleaner," "degreasing," or "anti-scale." In the second, give vinegar, soda, salt, and citric acid priority.

The agent’s composition determines how much of it to use. Only follow the directions on the package when pouring the concentrate or adding acid; do not pour by eye. After adding the cleaner to the drum or powder receptacle, a high-temperature "idle" cycle is initiated.

It is not advised to leave the washing machine unattended while it is being cleaned. Large chunks of accumulated scale may be left behind during cleaning and become lodged in the plum, endangering the machine gun. Should a sudden crack, hum, or sharp sound occur during the cycle, the program must be stopped, the garbage filter emptied, and it must be cleaned. You can proceed after washing.

Relieve the main containers from dirt

In order to thoroughly clean the inside of the Electrolux drum, you must begin a detergent cycle. Any cleaner—vinegar, citric acid, whiteness, or store chemistry—works well for the latter. Place the composition into the machine and begin the program, setting the heating temperature between 75 and 90 degrees for at least 1.5 hours, based on the dosage specified on the package. Linen shouldn’t be in the washing machine.

The machine needs to be rinsed twice after cleaning the dirt. Although it is ideal to use two quick washes, you can only use the "double rinsing" option. The most important thing is that the cleaner and any remaining scale and softened dirt get out of the washer.

Adhere to the manufacturer’s recommended dosage when using the cleaner, as excessive amounts of acid and alkali can corrode the machine parts!

The drum can be manually cleaned by following the guidelines provided below.

1. Take a sponge or soft cloth and wet it.
2. Wipe the drum with a wet cloth, moistening its surface.
3. Dip the sponge in powder or gel.
4. Clean the walls of the drum, paying special attention to the ribs, joints and edges.
5. Close the hatch, leaving the soapy drum for 40-60 minutes.
6. Collect dried foam and dirt with a dry cloth.
7. Rinse the washing machine with any idle cycle.

It is preferable to prioritize a thorough cleaning since it will aid in cleaning the system as a whole in addition to the drum. particularly if you use a professional cleaner made especially for washing machine cleaning. The concentrate "Frisch-Activ" is a good choice.

In order to clean the machine using "Frisch-Activ," you must:

• pour half a measuring cup into the powder receiver, the rest – into the drum;
• run a cycle with heating from 75 degrees;
• turn off the drain;
• after washing, leave the machine with a full drum for 20-30 minutes;
• drain the water;
• run the "Rinse" program twice.

Modern Electrolux washers come with a unique feature called "Drum Self-Cleaning." Thanks to a cycle that has been specifically designed, the system cleans the equipment when it is turned on. All the user has to do is press the button and keep an eye on the progress. Before activating the function, you can pour "Frisch-Activ" into the powder receptacle and tank for maximum impact.

Lint filter and drain hose

Rinsing the drain hose and drain filter will be necessary when performing a thorough cleaning. Ideally, you ought to schedule the cleaning of the pump impeller and pipes as well as the entire drainage system. All of the dirt that enters the washing machine settles and builds up in this area.

Initially, we perform the following actions to evaluate the drain filter’s state:

• disconnect the equipment from the utilities;
• lay oilcloth and rags around the machine – a lot of water may spill;
• prepare a basin or other large container;
• remove the door of the technical hatch by pressing the plastic latches;
• find a round black plug of the garbage filter behind the hatch;
• take hold of the existing protrusion and unscrew the nozzle counterclockwise;
• clean the filter from dirt and scale (if necessary, soak the "spiral" in a lemon solution);
• wash the seat and pull out the garbage stuck to the walls.

Observing the drain hose is the second step. After loosening the supplied clamps and carefully unplugging the corrugation from the machine body and the sewer, it needs to be rinsed under the faucet. It might be worthwhile to soak the sleeve in a citric acid solution for 20 to 60 minutes if the dirt is extremely "stuck."

After the high-temperature cycle is over, you can’t just unscrew the garbage filter because you risk burning yourself with boiling water!

Make sure to remove any debris from the pump. The guidelines are as follows:

• turn the machine on its left side (it is not possible on the right side – the water remaining in the powder receiver can flow out onto the dashboard and cause a short circuit);
• shine through the bottom and find the pump;
• unscrew the impeller from the pump;
• clean the impeller blades, as well as the snail and the pump itself, from debris and plaque;
• return the impeller to the shaft, securing it with bolts.

There are certain Electrolux washing machines, like the WISL line, that have an inlet filter. This mesh was put in the inlet hose to clean the tap water before use. Since it takes the brunt of rust and scale, frequent washing is essential. To accomplish this, cut off the water supply, unplug the hose, and use pliers to remove the nozzle. After that, brush it with an old toothbrush or run a strong stream over it.

Detergent drawer

Cleaning the detergent drawer is also necessary. First, the powder’s ninn component hardens and stays on the cueter’s walls. Second, contaminants from tap water that have landed on the surfaces of compartments. Thirdly, this area becomes more humid, which encourages the growth of mold and gives off an offensive stench. The typewriter distributes and absorbs all of this into the laundry.

Rinse the powder tray after using the machine, if possible!

The part must be cleaned on a regular basis to avoid powder buildup and the growth of mold. Usually, rinsing the container and using a sponge to walk along its walls is sufficient. If the plaque is very strong, you will need to soak the tray in a lemon solution for a few hours before brushing it off. The plumber’s cleaner should be used to process and clean any excess hardened powder.

Occasionally, the powder receptacle becomes so firmly attached to the machine body that it is challenging to remove. Under such circumstances, a thorough cleaning will be beneficial. Start an empty wash after adding the cleaner to the drum and tray.

Maintaining the cleanliness of your Electrolux washing machine is crucial to its longevity and effectiveness. Frequent upkeep keeps your machine operating smoothly, ensures that your clothes come out fresh, and helps prevent offensive odors. You can increase the longevity of your laundry machine and enhance the quality of your laundry output by taking the time to clean it.

The detergent drawer should be cleaned first because it can gather mildew and residue. Take it out and give it a thorough rinse, making sure to get into all the crevices and nooks. In addition, use a vinegar solution or a machine cleaner to clean the drum on a regular basis. This keeps the drum in excellent condition and helps get rid of any buildup.

Remember to replace the gaskets and rubber seals. These spaces are prone to collecting dirt and moisture, which can result in the growth of mold and offensive odors. Before shutting the door, make sure they are dry and give them a frequent wipe down. This little action can go a long way toward keeping your machine smelling good.

Finally, remember to regularly inspect and clean the filter. It’s a quick task that can keep your machine running smoothly and prevent clogs. Your Electrolux washing machine will last a long time and your laundry will always look its best if you adopt these easy cleaning techniques into your daily routine.

Video on the topic

WE DIDN"T EXPECT THIS 😲 Electrolux washing machine repair

Cleaning the Electrolux washing machine filter

how to clean the Electrolux EWT0862IDW washing machine filter

review instructions for the Electrolux EWS 1054 EFU washing machine

How to quickly find the path to the Electrolux washing machine filter: Handyman