Candy dishwasher does not drain water

Your Candy dishwasher can quickly transform from a useful kitchen tool into a troublesome issue if it stops draining water. You’re left with a pool of soiled water at the bottom of the machine instead of spotlessly clean dishes.

There are several potential causes of this problem, from minor obstructions to more significant mechanical malfunctions. Recognizing the root of the issue is the first step towards restoring your dishwasher to functionality.

This post will discuss the most frequent causes of improper draining in a Candy dishwasher and offer solutions.

Why there is no drain?

Let us first enumerate the primary causes of drain issues. If anything from the following list happened to your device, don’t panic; you can solve all of these issues on your own.

• The drain hose is pinched. Carefully examine this long and thin element of the dishwasher, it may be bent somewhere, or you may have unknowingly placed a heavy object on top of it, which blocked the normal flow of water. Straighten the hose, remove the heavy load from it, and also make sure that the hose is not damaged. After all the above actions, activate the drain mode again to make sure that the water is now draining.
• The drain filter is clogged. This can happen due to food residue, garbage, or shards of broken dishes. To prevent this from happening to your household appliances, clean the filter of foreign objects monthly.

Never put dishes in the dishwasher that still have food residue on them because this can clog the filter and prevent drainage.

• Clogged pump and drain pipe. This is also affected by debris, food residues, etc., which clog the pump with a pipe, due to which water accumulates in the tray and cannot go through the drain tract.

We will now address the three most typical issues with modern dishwashers not draining properly.

Inspect and clean the dishwasher filter

You shouldn’t worry if you think the filter may be clogged because it’s the simplest issue to resolve. All you have to do is perform a routine cleaning procedure, which is best done once a month. First, drain the liquid before proceeding.

1. Prepare a basin for water.
2. Disconnect the hose.
3. Activate the drain.

You can check for obstructions in the pipe and sewer during this process. You can begin cleaning the filter after the hopper’s water has been drained.

• Disconnect the machine from the power supply.
• Remove all the baskets from the washing chamber.
• Find the filter at the bottom of the chamber and disconnect it.
• There is a mesh installed at the bottom, which also needs to be pulled out for further cleaning.
• Thoroughly clean the elements from debris and dirt with a soft brush and a powerful stream of hot water.
• Additionally, remove the pump cover and carefully check the impeller, which could have been hit by broken dishware fragments, thereby blocking it. This pump cover may be on a latch or screw.

After cleaning the filter, testing the machine’s functionality is the only thing left to do. Proceed to the next point if the water still doesn’t drain even after doing this.

If the water in your Candy dishwasher isn’t draining, there may be a blockage in the drain hose, a malfunctioning pump, or a clogged filter. These are all common problems that can be fixed with basic troubleshooting techniques.

Perhaps the pump is not working

What should I do if the drain still doesn’t function even though the dishwasher filter is fine? This suggests that the dishwasher pump could be the source of the problem. Reaching it is difficult because you will need to disassemble the machine partially. But this isn’t complicated at all; a competent owner can handle everything by hand.

1. If the water has already been drained from the device, then it remains to tilt the equipment slightly on its side to drain the last remnants of liquid.
2. Use a sponge to wipe the filter dry and remove all moisture in it.
3. Put the "home assistant" on the back wall.
4. Remove the screws that secure the bottom cover.
5. Carefully disconnect the leak sensor fixed to the bottom cover on the other side.
6. Disconnect all wiring that is connected to the pump, and then remove the screws that hold the pump.

Make sure you snap a picture of the wiring so you will have a reference for correctly connecting the pump later on.

There are two phases to the part’s testing. A multimeter in ohmmeter mode should be used to measure the pump resistance after you have checked the impeller to make sure it rotates smoothly. Join the pump contacts to the tester probes. A reading of about 200 Ohms is what is expected. The element needs to be changed if the readings are abnormal or if the impeller is not rotating. If the issue is merely a clogged pump, clear out all the debris to solve it.

It can be annoying when a Candy dishwasher won’t drain the water, but the problem is usually easy to fix. Any number of issues, such as a kinked drain hose, a broken pump, or a clogged filter, can typically be fixed with some troubleshooting.

Many drainage problems can be avoided with routine maintenance, such as checking the hoses and cleaning the filter. By giving these chores some attention now, you can avoid bigger issues later on.

After trying these fixes, if the issue still doesn’t go away, it might be time to see a professional. Taking quick action to fix the problem will help guarantee that your dishwasher keeps operating well.

Video on the topic

CANDY dishwasher. Malfunction.Remedy.

The dishwasher does not drain water. The drain pump does not work. The dishwasher buzzes but does not merge.

Dishwasher does not drain the water causing of a half -button

What to do if the dishwasher remained in the filter of the dishwasher.

The dishwasher does not drain water – squeals: what to do, reasons. On the example of Electrolux