Atlant washing machine does not fill with water

It can be annoying and inconvenient when the water in your Atlant washing machine won’t fill. Your plans to do laundry may be abruptly derailed by this frequent problem, leaving you unsure of what went wrong.

Your washing machine may not be filling with water for a number of reasons. A simple fix like a kinked hose, a closed water supply valve, or a clogged filter could be the cause. However, it could also be related to more technical problems like a malfunctioning water inlet valve or an issue with the machine’s internal controls.

You can troubleshoot an issue and determine whether you need to call in a professional or if you can fix it yourself by being aware of the potential causes. This post will examine the most frequent causes of an Atlant washing machine not filling with water and offer helpful solutions to help you restart it.

What is broken in the machine?

Water is necessary for washing, so you must address the issue as soon as possible. But the issue isn’t always a specific malfunction; for instance, the central water supply disconnecting frequently causes issues. An unlocked door represents the second "non-repair" malfunction because when the drum is open, the wash does not begin and the UBL is inoperative.

You will need a thorough diagnosis if the door is slammed shut and there is water in the pipes. Initially, we attempt to identify the type of malfunction. Multiple malfunctions may cause a set to disappear all at once.

• Broken inlet valve. The first "symptom" of this breakdown is difficulty in washing out the detergent from the powder receptacle. If the powder remained undissolved in the tray for a long time, then the inevitable has come, and the device has finally broken down. However, it is better to check the guess with a test: connect to the network and apply 220 volts to the valve. A working device will close and click, and a faulty one will not respond to the supply of voltage.
• Clogged filter mesh. The water in the water supply is hard and dirty, and the bulk of foreign impurities and debris settles on the filter mesh located at the "entrance" to the machine. With a clogged filter Atlas hums for a long time, trying to fill the drum, but nothing happens.
• Overfilled coarse filter. Often the second filter built into the water supply system suffers as well. It takes the full brunt of dirty water, so it often gets clogged and blocks the flow of liquid into the washing machine.

The Atlant self-diagnostic system will display the error code "F17" or "E17" if the water intake time is exceeded.

• Faulty pressure switch. The most common cause of problems with intake is a faulty level sensor. It stops monitoring the water level, the module records the malfunction and, fearing underfilling or overfilling, stops the cycle. It is easy to check the functionality of the device: remove the top cover of the washing machine, find the pressure switch, unhook the tube going into the tank and blow it out. If several clicks are heard in response, then everything is fine. Otherwise, you will have to clean the device or replace it.
• Problems with the pressure switch hose. With prolonged use, the pipe gets damaged and loses its primary tightness, which negatively affects the operation of the sensor.
• A pinched hose. Perhaps the filling hose is pinched by the housing and blocks the water"s "path" to the drum.
• A non-functioning pump. Before a new fill, some of the water remaining in the housing is automatically drained. If the machine"s pump is broken, then pumping does not occur, and the board postpones filling the drum.
• A broken board. The electronic unit is the "brains" of the washing machine, controlling all the processes occurring inside. If there are problems with the board, the machine does not respond to user commands, in particular, it does not start filling with water.

Owners of contemporary machines should find it simpler as the self-diagnostic system ought to automatically log the issue and show the error code on the screen. The only thing left to do is figure out the combination by following the guidelines. Whatever the situation, it’s critical to identify the type of malfunction and know what to do next. Below is more information on this.

Check the warranty

It is advisable to delay running diagnostics on a brand-new machine if it does not fill with water. There is a 12-month warranty on all Atlant washing machines, and it is best to take advantage of the free in-home expert repair service. Remember that you forfeit your right to warranty service the moment you open the case yourself.

For a year, Atlant washing machines are covered by a free warranty.

For owners of machines built prior to 2019, worrying about the warranty is pointless. In this case, you should attempt to solve the issue on your own without paying the service center employee excessively. But before you do anything, read the manufacturer’s instructions, familiarize yourself with the machine’s mechanism, and keep safety measures in mind.

A clogged inlet filter, a broken water inlet valve, or an issue with the water supply itself could be the cause of your Atlant washing machine’s inability to fill with water. By locating and resolving these issues, you can restore your washing machine’s functionality and maintain the consistency of your laundry schedule.

How we will look for the problem?

Once you’ve made the decision to independently modify the water supply, you must get ready. Disconnect the washing machine from all communications first, and then start a check in steps, starting with the simpler ones. First, the fundamentals of diagnostics:

• We are convinced that there is water in the house (we open the crane in the bathroom or in the kitchen);
• We check that the valve on the water supply is open;
• We drain the water from the bulk hose, and then we examine the sleeve for damage, contractions and blockages.

We check the filter mesh to continue the diagnosis if everything is in order. This circular nozzle is fitted within a bulk hose. The filter needs to be cleaned because when it is blocked, water cannot pass through the mesh.

1. Disconnect the bulk hose from the washing.
2. Looking for a mesh.
3. We take the pliers for the protruding part of the grid and pull out the filter.
4. Rinse the mesh under water thoroughly, and with strong blocks we pass through the toothbrush.
5. Return the grid to the same place.

Be cautious when disconnecting a bulk hose since there is always "old" water in the sleeve that could leak onto the floor.

When the rough cleaning filter is clogged, the machine frequently does not flood the water. Since this nozzle is directly after the tap, you will need to use wrenches to unscrew a few components. Another challenge is that water will shoot out of the pipe when the retaining nut is released. The mesh doesn’t need to be cleaned individually because, when subjected to intense pressure, all of the dirt and debris will wash right out.

It is important to check a few common issues if the water in your Atlant washing machine is not filling up. Make sure the water supply is on and that there are no kinks or obstructions in the hoses before proceeding. A cursory examination frequently reveals straightforward issues that are simple to resolve.

Next, examine the water inlet valve since debris can occasionally clog it. The problem might be resolved by replacing or cleaning this valve. Remember to check the water pressure as well, as low pressure can impede the machine’s ability to fill correctly.

And lastly, think about the electronic parts. Problems with the sensors or control board could be the source of the issue. To avoid further complications, it’s a good idea to contact a professional if you’re not comfortable handling these parts yourself.

These steps will typically allow you to locate the issue and resolve it on your own. This helps you avoid paying for a service call as well as saving time.

Video on the topic

Atlant Washing Machine Does Not Fill with Water Repair

Atlant washing machine does not fill with water to the level, washing does not start

The washing machine does not fill with water? What to do if water does not enter the washing machine

The washing machine does not fill with water well or does not fill with water at all

Washing machine does not fill with water 🚱

6 reasons why the washing machine does not fill with water

The washing machine does not fill with water