Ariston washing machine does not spin the drum

It can be annoying and inconvenient if the drum on your Ariston washing machine isn’t spinning. Numerous factors, ranging from straightforward issues like an uneven load to more intricate mechanical failures, can cause this frequent problem.

The first step in fixing the issue is figuring out why the drum isn’t spinning. Often, basic troubleshooting will solve the problem, saving you the time and money it would otherwise cost to call a repair service.

This post will discuss the most frequent causes of your Ariston washing machine not spinning and offer workable fixes to get it operating again.

Started and stopped

The program is running and the laundry is loaded, but the operation doesn’t begin and the drum doesn’t rotate. Alternatively, it still performs a useful function and takes a few careless turns, but everything ends abruptly with a simple stop of the erratic portion. There is nothing that can be done when an error code appears on the washing machine’s display, if it has one. There are several reasons why this occurs:

• the laundry is poorly distributed in the drum, which causes an imbalance;
• the drive belt fails;
• there are problems with the heating element;
• there are problems with the engine (brush wear);
• there is a malfunction of the tachometer (a special element that regulates the rotation of the motor);
• "pops up" a breakdown of the electronic module;
• problems with the power supply wiring;
• there is a foreign object in the tank.

With so many explanations listed, one gets the impression that it is very hard to figure out exactly what went wrong, but there’s no need to freak out. Calm down and take a sensible approach to the issue, and nothing bad will happen to the equipment.

It spins during washing, but not during spinning

When it came time for spinning, the Ariston machine did not spin the drum, despite the fact that the first stage had been finished and the laundry had been placed in the drum and even cleaned. It’s possible that there isn’t a breakdown, but that the spinning wasn’t done in the correct mode. Verify if you have the delicate wash or "no spin" program selected, which spins the laundry very little or not at all. Additionally, there are other subtleties to consider.

1. There is too much small debris in the drain, preventing the water from coming out, which is why the spinning cannot technically be started.
2. Unbalance. The weight of the loaded laundry has exceeded the maximum, the items are pressed in a heap to one side and do not allow the machine to continue working.
3. The pressure switch (the device that informs the “brain” of the washing machine about the water level) is broken, so the spin cycle does not start without the required command.
4. Something has happened to the control board. A burnt-out wire or a broken triac can cause problems.

These kinds of incidents are common for all machine models, but it’s crucial that we comprehend the Hotpoint Ariston issue. Troubleshooting and prompt response will get the washing machine back in working order quickly. Furthermore, a lot of issues can be resolved by hand.

The equipment stops after filling with water

Let’s examine the breakdown’s "symptoms" as closely as we can. You need to make sure the washing machine has filled with water when it stops at the beginning. If so, you should try rotating the drum with your hands while draining the liquid through the debris filter. If the drum is jammed and only rotates very slowly or not at all when turned by hand, then something is stopping it from rotating. We must remember that the following is conceivable in this circumstance:

• the belt came off the drum or broke, and then ended up on the pulley, which blocks the movement of the drum.
• something, previously probably in the pocket, ended up between the mechanisms.
• the bearing is damaged and does not perform its functions in full. This can happen due to significant loads on the washing machine, when loading an excessive amount of clothes or if the seal was not properly lubricated (factory defect).

When the Ariston machine is operating, it usually makes clanking and grinding noises, which are indicative of a bearing malfunction. As soon as such noises appear, you should consider making repairs.

The drum of your Ariston washing machine may not be spinning for a number of common reasons, including a malfunctioning motor, a broken belt, or a clogged filter. All of these problems are frequently fixable with some basic troubleshooting and repair.

The machine hums after starting

The washing machine makes a distinctive humming sound at the start of the cycle, as though it is filling with water, but the drum does not spin. A motor that is powered on and yet, for whatever reason, is unable to complete its task produces an identical sound. What is it that we focus on specifically?

1. Worn brushes. Often an indirect indicator of this problem is an unpleasant burning smell that comes from the machine. Abrasion of this element is a common problem characteristic of collector motors.
2. Damage to motor lamellas. A rarer problem, but it also occurs. You will have to conduct a meticulous check.
3. Bearing destruction and jamming. Squeaking and other unpleasant sounds are the forerunner of the main problem, because after the bearing is destroyed, the drum stops dead in its tracks.

If the drum on your Ariston washing machine isn’t spinning, you need to find the issue right away to prevent more damage. Frequently, a straightforward problem like an uneven load or a jammed door could be the cause. You can save time and stress by reviewing these fundamentals.

If these simple solutions are ineffective, there may be a more serious problem, such as a malfunctioning belt, motor, or control board. It is best in these situations to seek professional advice or consult the handbook that came with your machine for detailed troubleshooting instructions.

Many of these issues can be avoided with routine maintenance. Maintaining your washing machine for years to come can help keep it operating smoothly by cleaning the filters, avoiding overloading, and checking its level.

Video on the topic

The washing machine does not spin the drum. Reasons and do-it-yourself repair

Hotpoint Ariston washing machine does not spin the drum

The drum of the Ariston washing machine does not spin, Complete diagnostics and solutions to the problem, #Drum #Ind

Ariston washing machine does not spin the drum