AEG washing machine does not drain water

It can be very annoying when the water in your AEG washing machine won’t drain. Whether it’s a minor glitch or an indication of a larger problem, resolving this issue can be difficult, particularly when you’re pressed for time.

This can occur for a number of typical reasons, from straightforward obstructions to intricate mechanical breakdowns. Determining the potential source of the issue can assist you in determining whether you need to hire an expert or if it’s something you can resolve on your own.

This post will guide you through the potential reasons and provide some simple fixes to get your AEG washing machine’s water draining correctly once more.

Maybe the filter is just clogged?

Initially, attempt to examine the "home assistant’s" actions. Knowing the precise moment the machine froze is crucial, as is knowing if it emptied the machine completely or just stopped trying to drain. Recall if the washing machine made noise and what noises came before it shut off.

The most common causes of drainage issues are clogged waste filters and malfunctioning pumps.

An obstruction in the sewage pipe can occasionally be the cause of the machine’s inability to empty water. Therefore, you shouldn’t "blame" the washing machine if water doesn’t drain properly from the bathtub or toilet. To clean the riser, contact a plumber.

Once external communications are not the issue, you can start diagnosing the "home assistant". First, look for obstructions in the waste filter. The following will be the sequence of events:

• de-energize the washing machine;
• turn off the shut-off valve responsible for supplying water to the washing machine;
• disconnect the equipment from the water supply;
• cover the floor around the machine with unnecessary rags or oilcloth;
• Prepare a low basin for collecting liquid;
• open the technical hatch door, behind which the dust filter is hidden;
• tilt the washing machine back so that the bottom is raised 3-5 cm from the floor;
• place a basin under the machine in the place where the filter is located;
• first unscrew the "dustbin" half a turn, collect the water;
• remove the spiral completely.

On the majority of AEG models, the dust filter is situated in the body’s lower right corner.

Revers the filter element’s screw. The spiral can be taken out of the machine after a few turns. Take care when removing the "dustbin" as water may flow out of the opening under high pressure.

The filter needs to be cleaned of hair, wound threads, and dirt deposits by giving it a wash in warm water. If the spiral has limescale, immerse the affected area in a citric acid solution for a few hours. The plastic "garbage" is easily deformed by exposure to high temperatures, so it cannot be dipped into boiling water.

Make sure you clean the filter’s seat as well as the filter itself. Use a flashlight to illuminate the opening and remove any foreign objects (often coins, matches, etc.). Take a moist cloth and wipe the walls.

The filter element can then be screwed back into position. To prevent leaks in the future, the trash can needs to be installed evenly. Checking the drain pump is necessary if cleaning doesn’t help.

It can be annoying when an AEG washing machine won’t drain water, but typical issues like a clogged filter, a blocked drain hose, or a broken pump are usually to blame. By being aware of these possible causes and knowing how to deal with them, you can swiftly fix the problem and restore your machine’s functionality without having to pay for pricey repairs.

How to remove the pump for inspection?

Waste water from the tank is intended to be pumped into the sewer by the washing machine’s pump. A non-functioning drain could easily be the result of a broken pump. You are able to identify and fix the component on your own. We’ll walk you through the process.

You must first take the pump out of the apparatus. On AEG washing machines, the pump is accessible from the bottom. Throughout the task, a screwdriver and a wrench will come in useful. Prepare a small basin as well to hold water. The following will be the subsequent action algorithm:

• disconnect the washing machine from the network and communications;
• unscrew the garbage filter (how to do this has already been described);
• lay the washing machine on its left side, having previously covered the floor with a blanket;
• unscrew the bolt securing the pump;
• disconnect all wires and pipes connected to it from the pump;
• turn the pump from right to left, simultaneously pushing it inward;
• pull the drain pump out of the machine;
• lay the pump on a flat, dry surface.

Make sure the washing machine is de-energized before disassembling. The machine must be placed on its left side; if it is placed against the right wall, water from the powder receptacle may overflow the control board. We will now work out how to inspect the drain pump at our residence.

Let"s look inside the pump

The drain pump frequently clogs with debris and stops operating as a result. Reviving the pump can be aided by cleaning it. To be more exact, the impeller needs to be cleaned.

The pump’s impeller is "hidden" inside. You will need to "split" the pump open and remove the screws in order to reach it. The blade-revolving portion of the housing is visible after a portion of it has been removed.

It’s important to limit the impeller’s motion. You have to tighten the fix when the "head" starts to fly off its axis. The part needs to be cleaned if the blades are obstructed and cannot rotate. Take out all hair, threads, and debris from the "wheel." Additionally, the pump snail is cleaned for the "company."

At least once a year, a thorough cleaning of the AEG washing machine’s components is advised.

The drain pump needs to be assembled and reinstalled after cleaning. Next, begin a test wash. Watch the machine as it operates. If the water is successfully pumped into the sewer, the clogged pump was, in fact, the root of the issue.

If the water in your AEG washing machine isn’t draining, troubleshooting should usually be able to resolve the issue. Common offenders like a clogged drain hose or filter are frequently easily fixed.

If these simple solutions don’t work, though, it might be time to have the pump checked out or have an expert come in. Prompt action can help shield your machine from more severe harm.

Cleaning the filter and making sure the drain hose is clear are two examples of routine maintenance that can help keep your washing machine operating efficiently and prevent problems in the future. You can avoid a great deal of trouble later on by taking a little care now.

Video on the topic

Repair of the AEG washing machine at home does not drain water official service center Deutsch Mechanics ⚙🔧🇩🇪

What to do if the washing machine does not drain water

AEG washing machine does not drain water. Lavalogic 1800 error C3